perm filename TIMING.MSG[TIM,LSP]8 blob
sn#607528 filedate 1981-08-09 generic text, type C, neo UTF8
COMMENT ⊗ VALID 00113 PAGES
C REC PAGE DESCRIPTION
C00001 00001
C00015 00002 ∂27-Feb-81 1334 Deutsch at PARC-MAXC Re: Timings
C00017 00003 ∂27-Feb-81 1342 Dick Gabriel <RPG at SU-AI> Timings
C00019 00004 ∂27-Feb-81 1354 RPG Timings
C00021 00005 ∂27-Feb-81 1412 Bruce E. Edwards <BEE at MIT-AI> Re: timings
C00023 00006 ∂27-Feb-81 1427 Deutsch at PARC-MAXC Re: Timings
C00024 00007 ∂27-Feb-81 1502 Deutsch at PARC-MAXC Re: Timings
C00026 00008 ∂27-Feb-81 1533 Dick Gabriel <RPG at SU-AI> Timings
C00028 00009 ∂27-Feb-81 1616 Earl A. Killian <EAK at MIT-MC> Timings
C00029 00010 ∂27-Feb-81 1615 George J. Carrette <GJC at MIT-MC> timings
C00030 00011 ∂27-Feb-81 1655 David.Neves at CMU-10A Re: Timings
C00031 00012 ∂27-Feb-81 1658 David.Neves at CMU-10A Re: Timings
C00032 00013 ∂27-Feb-81 1710 CSVAX.fateman at Berkeley Timings
C00033 00014 ∂27-Feb-81 1719 CSVAX.fateman at Berkeley Timings
C00034 00015 ∂27-Feb-81 1730 CSVAX.fateman at Berkeley timings
C00036 00016 ∂27-Feb-81 1947 George J. Carrette <GJC at MIT-MC> Timings
C00038 00017 ∂27-Feb-81 2002 Howard I. Cannon <HIC at MIT-MC> Timings
C00039 00018 ∂27-Feb-81 2008 GYRO at MIT-ML (Scott W. Layson) Lisp timings
C00041 00019 ∂27-Feb-81 2048 PDL at MIT-DMS (P. David Lebling) [Re: Timings ]
C00042 00020 ∂27-Feb-81 2057 JONL at MIT-MC (Jon L White) Timings for LISP benchmarks, and reminder of a proposal by Deutsch
C00049 00021 ∂27-Feb-81 2117 Howard I. Cannon <HIC at MIT-MC> Timings for LISP benchmarks
C00050 00022 ∂27-Feb-81 2131 CWH at MIT-MC (Carl W. Hoffman) Timings
C00051 00023 ∂27-Feb-81 2201 CSVAX.fateman at Berkeley here's a test for you to look at/ distribute
C00060 00024 ∂27-Feb-81 2201 CSVAX.fateman at Berkeley Timings for LISP benchmarks, and reminder of a proposal by Deutsch
C00061 00025 ∂28-Feb-81 0916 NEDHUE at MIT-AI (Edmund M. Goodhue) Timings
C00062 00026 ∂28-Feb-81 1046 Barry Margolin <Margolin at MIT-Multics> Re: Timings
C00063 00027 ∂28-Feb-81 1109 Barry Margolin <Margolin at MIT-Multics> Re: Timings
C00064 00028 ∂28-Feb-81 1424 Deutsch at PARC-MAXC Re: Timings for LISP benchmarks, and reminder of a proposal by
C00065 00029 ∂28-Feb-81 1718 YONKE at BBND JONL's message concerning benchmarks
C00066 00030 ∂28-Feb-81 1818 CSVAX.fateman at Berkeley why I excluded GC times
C00068 00031 ∂28-Feb-81 2014 Guy.Steele at CMU-10A Re: Timings
C00070 00032 ∂28-Feb-81 2016 Scott.Fahlman at CMU-10A benchmarks
C00071 00033 ∂01-Mar-81 0826 PLATTS at WHARTON-10 ( Steve Platt) timing for lisp
C00072 00034 ∂01-Mar-81 1300 RJF at MIT-MC (Richard J. Fateman) more lisp mavens
C00073 00035 ∂02-Mar-81 0443 Robert H. Berman <RHB at MIT-MC> Timings
C00074 00036 ∂02-Mar-81 0543 Robert H. Berman <RHB at MIT-MC> Timings
C00075 00037 ∂02-Mar-81 0741 James E. O'Dell <JIM at MIT-MC> Timings
C00078 00038 ∂02-Mar-81 1006 Deutsch at PARC-MAXC Re: Timings
C00079 00039 ∂02-Mar-81 1312 Barry Margolin <Margolin at MIT-Multics> Re: Timings
C00080 00040 ∂02-Mar-81 1634 RPG Lisp Timings
C00085 00041 ∂03-Mar-81 1524 RPG Lisp Timing Mailing List
C00087 00042 Here's the first message, which you missed:
C00092 00043 ∂04-Mar-81 0449 Robert H. Berman <RHB at MIT-MC> Lisp Timing Mailing List
C00097 00044 ∂04-Mar-81 0957 Scott.Fahlman at CMU-10A Re: Translators
C00100 00045 ∂04-Mar-81 0959 CSVAX.char at Berkeley lisp benchmarking
C00103 00046 ∂04-Mar-81 1627 HEDRICK at RUTGERS sometime of possible interest
C00108 00047 ∂06-Mar-81 1301 HES at MIT-AI (Howard Shrobe) Methodology considerations:
C00110 00048 Subject: Lisp Timings Group
C00117 00049 ∂10-Mar-81 0727 correira at UTEXAS-11 lisp timings
C00119 00050 ∂03-Mar-81 2109 Barrow at SRI-KL (Harry Barrow ) Lisp Timings
C00122 00051 ∂02-Mar-81 0004 Charles Frankston <CBF at MIT-MC> timings
C00126 00052 ∂17-Mar-81 1155 Masinter at PARC-MAXC Re: GC
C00130 00053 ∂16-Mar-81 1429 HEDRICK at RUTGERS Re: Solicitation
C00135 00054 ∂16-Mar-81 1433 HEDRICK at RUTGERS Re: GC
C00142 00055 ∂16-Mar-81 1810 Scott.Fahlman at CMU-10A Re: GC
C00144 00056 ∂16-Mar-81 1934 PLATTS at WHARTON-10 ( Steve Platt) lisp -- my GC and machine specs
C00148 00057 ∂17-Mar-81 0745 Griss at UTAH-20 (Martin.Griss) Re: GC
C00149 00058 ∂17-Mar-81 0837 Robert S. Boyer <BOYER at SRI-CSL> Solicitation
C00153 00059 ∂17-Mar-81 0847 Robert S. Boyer <BOYER at SRI-CSL> LISP Timings
C00155 00060 ∂17-Mar-81 1155 Masinter at PARC-MAXC Re: GC
C00159 00061 ∂17-Mar-81 1218 RPG Bureaucracy
C00160 00062 ∂17-Mar-81 1921 Bernard S. Greenberg <Greenberg at MIT-Multics> Re: Solicitation
C00170 00063 ∂31-Mar-81 1451 RPG Timing Benchmarks
C00172 00064 ∂01-Apr-81 1550 Masinter at PARC-MAXC
C00177 00065 ∂05-Apr-81 2141 JHL via LONDON
C00178 00066 ∂05-Apr-81 2217 Carl Hewitt <CARL at MIT-AI> Lisp Timing Mailing List
C00179 00067 ∂06-Apr-81 1302 RPG Timing benchmark
C00188 00068 ∂06-Apr-81 2007 RPG
C00190 00069 ∂05-Apr-81 0208 H at MIT-AI (Jack Holloway) lisp timings
C00191 00070 ∂06-Apr-81 1410 HEDRICK at RUTGERS Re: Timing benchmark
C00194 00071 ∂06-Apr-81 1931 Bernard S. Greenberg <Greenberg at MIT-Multics> Re: Timing benchmark
C00197 00072 ∂06-Apr-81 2008 HEDRICK at RUTGERS Re: Timing benchmark
C00203 00073 ∂06-Apr-81 2007 RPG
C00205 00074 ∂07-Apr-81 0924 RPG Rules
C00209 00075 ∂07-Apr-81 1323 JONL at MIT-MC (Jon L White) Proposed ''mini'' benchmark, with interpretation.
C00222 00076 ∂10-Apr-81 1051 HEDRICK at RUTGERS Re: Rules
C00230 00077 ∂10-Apr-81 1205 George J. Carrette <GJC at MIT-MC> Rules
C00232 00078 ∂11-Apr-81 1001 CSVAX.jkf at Berkeley result of pairs benchmark on franz.
C00237 00079 ∂13-Apr-81 1320 RPG
C00239 00080 ∂13-Apr-81 1239 RPG Groundrules (reprise)
C00244 00081 ∂13-Apr-81 1338 CLR at MIT-XX Re: Groundrules (reprise)
C00247 00082 ∂13-Apr-81 1724 YONKE at BBND Re: Groundrules (reprise)
C00249 00083 ∂13-Apr-81 1934 Mabry Tyson <ATP.Tyson at UTEXAS-20> Re: Groundrules (reprise)
C00254 00084 ∂13-Apr-81 2214 HEDRICK at RUTGERS Re: Groundrules (reprise)
C00260 00085 ∂21-Apr-81 1316 RPG SCCPP
C00261 00086 ∂13-Mar-81 1959 MEEHAN at MIT-AI (James R. Meehan)
C00263 00087 ∂31-Mar-81 1615 Deutsch at PARC-MAXC Re: Timing Benchmarks
C00264 00088 ∂21-Apr-81 1604 Greenberg.Symbolics at MIT-Multics
C00266 00089 ∂07-Apr-81 1037 Mabry Tyson <ATP.Tyson at UTEXAS-20> Re: Rules
C00268 00090 ∂07-Apr-81 1107 Mabry Tyson <ATP.Tyson at UTEXAS-20> Rules - GC time
C00272 00091 ∂07-Apr-81 2213 Mabry Tyson <ATP.Tyson at UTEXAS-20> SCCPP on UCI-Lisp
C00275 00092 ∂21-Apr-81 2018 Mabry Tyson <ATP.Tyson at UTEXAS-20> Lost mail?
C00287 00093 ∂06-Apr-81 1204 RPG
C00293 00094 ∂14-Apr-81 2031 RPG
C00319 00095 ∂22-Apr-81 1801 Bernard S. Greenberg <Greenberg at MIT-Multics> Multics Timing results vindicated
C00321 00096 ∂23-Apr-81 1232 RPG FRANZ Benchmark (FRPOLY)
C00335 00097 ∂23-Apr-81 1245 RPG Franz benchmark
C00336 00098 ∂24-Apr-81 1324 Bernard S. Greenberg <Greenberg at MIT-Multics> Re: FRANZ Benchmark, Multics Numbers
C00339 00099 ∂24-Apr-81 1414 RPG Errata
C00340 00100 ∂24-Apr-81 1608 CSVAX.jkf at Berkeley octal vrs decimal
C00341 00101 ∂25-Apr-81 1242 Greenberg.Symbolics at MIT-Multics Re: octal vrs decimal
C00342 00102 ∂25-Apr-81 1320 Vanmelle at SUMEX-AIM Re: Re: octal vrs decimal
C00343 00103 ∂25-Apr-81 1727 Greenberg.Symbolics at MIT-Multics Re: Re: octal vrs decimal
C00344 00104 ∂25-Apr-81 2210 CSVAX.jkf at Berkeley Re: Re: octal vrs decimal
C00346 00105 ∂24-Apr-81 1411 CSVAX.jkf at Berkeley franz timing results
C00348 00106 ∂28-Apr-81 1122 Vanmelle at SUMEX-AIM Re: Benchmarks
C00350 00107 ∂28-Apr-81 2115 Mabry Tyson <ATP.Tyson at UTEXAS-20> Re: FRANZ Benchmark
C00354 00108 ∂02-May-81 1245 Mabry Tyson <ATP.Tyson at UTEXAS-20> Re: FRANZ Benchmark
C00360 00109 ∂04-May-81 1326 correira at UTEXAS-11 UTLISP benchmarks
C00362 00110 ∂05-May-81 0643 correira at UTEXAS-11 SCCPP Timings for UTLISP
C00364 00111 ∂05-May-81 0643 correira at UTEXAS-11 FRPOLY Timings for UTLISP
C00370 00112 ∂05-May-81 0643 correira at UTEXAS-11 A thumbnail sketch of UTLISP
C00379 00113 ∂26-May-81 0916 George J. Carrette <GJC at MIT-MC> benchmark.
C00396 ENDMK
C⊗;
∂27-Feb-81 1334 Deutsch at PARC-MAXC Re: Timings
Date: 27 Feb 1981 13:32 PST
From: Deutsch at PARC-MAXC
Subject: Re: Timings
In-reply-to: RPG's message of 27 Feb 1981 1319-PST
To: Dick Gabriel <RPG at SU-AI>
cc: info-lispm at MIT-AI
Your suggestion sounds great. What we need is someone to organize the process
just a little. Such a person would do something like the following:
1) Collect the names of volunteers or contact persons at each site, to send sample
programs to.
2) Collect the sample programs from each site, and disseminate them to the
volunteers or contacts at the other sites.
3) Collect the translated sample programs (in case there was controversy over
whether the translation was "trivial", for example, and for documentation and
historical purposes).
4) Collect the results of the timings run at each site, and disseminate them.
Would you like to volunteer?
∂27-Feb-81 1342 Dick Gabriel <RPG at SU-AI> Timings
Date: 27 Feb 1981 1319-PST
From: Dick Gabriel <RPG at SU-AI>
Subject: Timings
To: deutsch at PARC-MAXC
CC: info-lispm at MIT-AI
Since everyone I know of is trying to make a decision about what
to do about Lisp computing in the next five years, perhaps we should
try to co-ordinate a test that will help everyone make a decision.
For instance, each center (PARC, MIT, Stanford, CMU, Berkeley,...)
can provide a program that is of interest to them (not too big, of course);
each test site will then provide someone to re-code (in a very trivial sense:
turning greaterp into >, adding declarations) those programs into reasonably
efficient code for their system. The authors will provide timing data and
timing points in their code.
Each center may have a few programs since they may have diverse
communities (SAIL and HPP at Stanford). I would be happy to volunteer to
test programs for SAIL MacLisp, which is a 10 version.
-rpg-
∂27-Feb-81 1354 RPG Timings
To: deutsch at PARC-MAXC
CC: RPG at SU-AI, info-lispm at MIT-AI
I will volunteer to co-ordinate the Lisp timing test. I plan to contact:
Deutsch/Masinter at Parc (InterLisp on MAXC, Dorado, Dolphin...)
RPG/ROD at SAIL (MacLisp on SAIL, TOPS-20, FOONLY F2)
VanMelle@SUMEX (InterLisp on TOPS-20)
Fateman at Berkeley (FranzLisp on VAX)
Hedrick at Rutgers (UCILISP on TOPS-10?)
Fahlman/Steele at CMU (SPICELISP on ?, MacLisp on CMU-10)
HIC at MIT (Lisp Machine)
JONL at MIT (MacLisp on ITS, NIL on VAX)
Westfold at SCI (InterLisp on F2)
Weyhrauch at SAIL (Ilisp on SAIL, LISP1.6 on SAIL)
If anyone has any suggestions about who else to contact or other Lisps
and/or machines to try, let me know soon.
-rpg-
∂27-Feb-81 1412 Bruce E. Edwards <BEE at MIT-AI> Re: timings
Date: 27 February 1981 16:32-EST
From: Bruce E. Edwards <BEE at MIT-AI>
Subject: Re: timings
To: CPR at MIT-EECS
cc: INFO-LISPM at MIT-AI, RWS at MIT-XX
As Peter Deutsch has pointed out this is a crummy benchmark, which was implemented
by relatively unenlighted programming on the CADR. I made it almost 50% faster
in 5 minutes, and the new numbers are much better. They could be made much better,
but basically people aren't interested in hacking uninteresting benchmarks. Things
like a natural language parser or an AI program is more what we are interested in.
There are some data points along this line, but I can't remember the exact numbers.
Hopefully RG has the numbers for the WOODS lunar program tucked away somewhere.
∂27-Feb-81 1427 Deutsch at PARC-MAXC Re: Timings
Date: 27 Feb 1981 14:26 PST
From: Deutsch at PARC-MAXC
Subject: Re: Timings
In-reply-to: RPG's message of 27 Feb 1981 1354-PST
To: Dick Gabriel <RPG at SU-AI>
Great! Perhaps we will finally throw some light into the murk of claims and
counter-claims about Lisp speeds that have been made for many years.
You might consider sending out some kind of announcement to LISP-FORUM
and/or LISP-DISCUSSION at MIT-AI as well -- I'm not sure everyone of interest
is on INFO-LISPM.
∂27-Feb-81 1502 Deutsch at PARC-MAXC Re: Timings
Date: 27 Feb 1981 13:32 PST
From: Deutsch at PARC-MAXC
Subject: Re: Timings
In-reply-to: RPG's message of 27 Feb 1981 1319-PST
To: Dick Gabriel <RPG at SU-AI>
cc: info-lispm at MIT-AI
Your suggestion sounds great. What we need is someone to organize the process
just a little. Such a person would do something like the following:
1) Collect the names of volunteers or contact persons at each site, to send sample
programs to.
2) Collect the sample programs from each site, and disseminate them to the
volunteers or contacts at the other sites.
3) Collect the translated sample programs (in case there was controversy over
whether the translation was "trivial", for example, and for documentation and
historical purposes).
4) Collect the results of the timings run at each site, and disseminate them.
Would you like to volunteer?
∂27-Feb-81 1533 Dick Gabriel <RPG at SU-AI> Timings
Date: 27 Feb 1981 1354-PST
From: Dick Gabriel <RPG at SU-AI>
Subject: Timings
To: deutsch at PARC-MAXC
CC: RPG at SU-AI, info-lispm at MIT-AI
I will volunteer to co-ordinate the Lisp timing test. I plan to contact:
Deutsch/Masinter at Parc (InterLisp on MAXC, Dorado, Dolphin...)
RPG/ROD at SAIL (MacLisp on SAIL, TOPS-20, FOONLY F2)
VanMelle@SUMEX (InterLisp on TOPS-20)
Fateman at Berkeley (FranzLisp on VAX)
Hedrick at Rutgers (UCILISP on TOPS-10?)
Fahlman/Steele at CMU (SPICELISP on ?, MacLisp on CMU-10)
HIC at MIT (Lisp Machine)
JONL at MIT (MacLisp on ITS, NIL on VAX)
Westfold at SCI (InterLisp on F2)
Weyhrauch at SAIL (Ilisp on SAIL, LISP1.6 on SAIL)
If anyone has any suggestions about who else to contact or other Lisps
and/or machines to try, let me know soon.
-rpg-
∂27-Feb-81 1616 Earl A. Killian <EAK at MIT-MC> Timings
Date: 27 February 1981 19:16-EST
From: Earl A. Killian <EAK at MIT-MC>
Subject: Timings
To: RPG at SU-AI
I've got a queuing simulation program in MC:EAK;SIMUL > that
while it isn't at all typical of AI, uses an interesting mix of
list and numeric computation, and also runs for a fair time while
being not overly long. I'm not sure whether its useful to you,
but if it is, let me know.
∂27-Feb-81 1615 George J. Carrette <GJC at MIT-MC> timings
Date: 27 February 1981 17:35-EST
From: George J. Carrette <GJC at MIT-MC>
Subject: timings
To: Deutsch at PARC-MAXC
cc: INFO-LISPM at MIT-MC, masinter at PARC-MAXC, guttag at MIT-XX,
RWS at MIT-XX
How about using Macsyma? It has some interesting programs in it,
and it has given the Lispmachine quite a work-out on some large
real problems (or did the Lispmachine give macsyma a work out?).
-gjc
∂27-Feb-81 1655 David.Neves at CMU-10A Re: Timings
Date: 27 February 1981 1954-EST (Friday)
From: David.Neves at CMU-10A
To: Dick Gabriel <RPG at SU-AI>
Subject: Re: Timings
In-Reply-To: Dick Gabriel's message of 27 Feb 81 16:54-EST
Message-Id: <27Feb81 195427 DN10@CMU-10A>
why not also try TLC lisp on a micro. ask jra@sail
also BBN's jerico might be relevant but i don't think they
have a lisp for it.
∂27-Feb-81 1658 David.Neves at CMU-10A Re: Timings
Date: 27 February 1981 1957-EST (Friday)
From: David.Neves at CMU-10A
To: Dick Gabriel <RPG at SU-AI>
Subject: Re: Timings
In-Reply-To: Dick Gabriel's message of 27 Feb 81 16:54-EST
Message-Id: <27Feb81 195751 DN10@CMU-10A>
p.s. also i believe people at BBN are trying to put Interlisp on
a Prime computer. If they do have a version up that would be a
another data point. i don't know who you would contact though.
∂27-Feb-81 1710 CSVAX.fateman at Berkeley Timings
Date: 27 Feb 1981 16:20:26-PST
From: CSVAX.fateman at Berkeley
To: RPG@SU-AI, deutsch@PARC-MAXC
Subject: Timings
Cc: info-lispm@mit-ai
add Griss@utah-20 (standard lisp on 10, b-1700, ...)
∂27-Feb-81 1719 CSVAX.fateman at Berkeley Timings
Date: 27 Feb 1981 16:22:33-PST
From: CSVAX.fateman at Berkeley
To: RPG@SU-AI, deutsch@PARC-MAXC
Subject: Timings
Cc: info-lispm@mit-ai
add Griss@utah-20 (standard lisp on 10, b-1700, ...)
∂27-Feb-81 1730 CSVAX.fateman at Berkeley timings
Date: 27 Feb 1981 16:43:27-PST
From: CSVAX.fateman at Berkeley
To: Deutsch@PARC-MAXC, GJC@MIT-MC
Subject: timings
Cc: INFO-LISPM@MIT-MC, RWS@MIT-XX, CSVAX.fateman@Berkeley, guttag@MIT-XX, masinter@PARC-MAXC
George: are you offering to put Macsyma up in Interlisp? We already
have some LM /KL-10/ VAX-11/780 benchmarks (KL-10 maclisp):
Vaxima and Lisp Machine timings for DEMO files
(fg genral, fg rats, gen demo, begin demo)
(garbage collection times excluded.) Times in seconds.
MC VAXIMA 128K lm 192K lm 256K lm VAXIMA Jul 80
4.119 17.250 43.333 19.183 16.483 15.750
2.639 7.016 55.916 16.416 13.950
3.141 10.850 231.516 94.933 58.166
4.251 16.700 306.350 125.666 90.716 12.400
(Berkeley CS.VAX 11/780 UNIX April 8, 1980, KL-10 MIT-MC ITS April 9, 1980.)
improvements due to expanding alike1 and a few odds and ends as macros;
also some improvements in the compiler.
∂27-Feb-81 1947 George J. Carrette <GJC at MIT-MC> Timings
Date: 27 February 1981 22:47-EST
From: George J. Carrette <GJC at MIT-MC>
Subject: Timings
To: RPG at SU-AI
cc: deutsch at PARC-MAXC
I have a usefull benchmark which I just tried in Maclisp at MIT-MC
and on a LISPM. It is code which does line-drawing window-clipping
for arbitrary convex polygonal regions. This code is in actual use.
If you want to see it, it is on MIT-MC in
[MC:BLIS11;CLIP >]. (yes, I hack BLISS. (wow what a compiler!))
It is a nice example because it tests the speed of the FUNCALL dispatch.
The file is conditionalized to run in either LISPM or Maclisp, and
even includes the timing methods used. I would very much like it
if I could run the same (*exactly*) conditionalized source on
N different systems, that way I would have
(1) greater confidence
(2) an exact knowledged of how things are done differently on the
different systems. e.g. how much hair one has to go through to
declare things to the compiler.
-gjc
∂27-Feb-81 2002 Howard I. Cannon <HIC at MIT-MC> Timings
Date: 27 February 1981 23:02-EST
From: Howard I. Cannon <HIC at MIT-MC>
Subject: Timings
To: RPG at SU-AI
I'll be happy to do the timing tests.
--Howard
∂27-Feb-81 2008 GYRO at MIT-ML (Scott W. Layson) Lisp timings
Date: 27 FEB 1981 2306-EST
From: GYRO at MIT-ML (Scott W. Layson)
Subject: Lisp timings
To: rpg at SU-AI
CC: GYRO at MIT-ML, INFO- at MIT-ML, INFO-LISPM at MIT-ML
I know this is a little silly, but if you have any REALLY tiny
benchmarks (space-wise) I would like to try them out in TLC-Lisp
and muLisp, both running on a 64K Z-80. These Lisps don't page,
so the program and data have to fit in small real memory.
(Perhaps I should call them "Lisplets"?)
Incidentally, it seems to me that GC time should be included in
the times reported. Different systems generate garbage at
different rates and deal with it at different efficiencies,
and this shows up in the user-response time of the systems
(which is, after all, what we really want to know).
-- Scott Layson
---------------
∂27-Feb-81 2048 PDL at MIT-DMS (P. David Lebling) [Re: Timings ]
Date: 27 Feb 1981 2348-EST
From: PDL at MIT-DMS (P. David Lebling)
To: rpg at SU-AI
In-reply-to: Message of 27 Feb 81 at 1354 PST by RPG@SU-AI
Subject: [Re: Timings ]
Message-id: <[MIT-DMS].187847>
You should contact either CLR@MIT-XX or myself for Muddle.
Dave
∂27-Feb-81 2057 JONL at MIT-MC (Jon L White) Timings for LISP benchmarks, and reminder of a proposal by Deutsch
Date: 27 FEB 1981 2352-EST
From: JONL at MIT-MC (Jon L White)
Subject: Timings for LISP benchmarks, and reminder of a proposal by Deutsch
To: rpg at SU-AI
CC: LISP-DISCUSSION at MIT-MC, BEE at MIT-AI, JHL at MIT-AI
CC: CSVAX.fateman at BERKELEY, RWS at MIT-XX
I notice you sent your proposal to INFO-LISPM, and thought that the
LISP-DISCUSSION community might want to be aware of it too. (Deutsch and
Masinter are, I believe, on this list, as is Griss).
Date: 27 Feb 1981 1354-PST
From: Dick Gabriel <RPG at SU-AI>
I will volunteer to co-ordinate the Lisp timing test. I plan to contact:
Deutsch/Masinter at Parc (InterLisp on MAXC, Dorado, Dolphin...)
RPG/ROD at SAIL (MacLisp on SAIL, TOPS-20, FOONLY F2)
VanMelle@SUMEX (InterLisp on TOPS-20)
Fateman at Berkeley (FranzLisp on VAX)
Hedrick at Rutgers (UCILISP on TOPS-10?)
Fahlman/Steele at CMU (SPICELISP on ?, MacLisp on CMU-10)
HIC at MIT (Lisp Machine)
JONL at MIT (MacLisp on ITS, NIL on VAX)
Westfold at SCI (InterLisp on F2)
Weyhrauch at SAIL (Ilisp on SAIL, LISP1.6 on SAIL)
If anyone has any suggestions about who else to contact or other Lisps
and/or machines to try, let me know soon.
The contact for Rutgers-LISP should probably be JOSH@RUTGERS-10
(John Storrs Hall) who is actively extending the formerly-called UCILISP.
Fateman's login name is CSVAX.fateman@Berkeley unless there is some
smarts to his mailer that I don't know about.
Also, I'd like to suggest the following additions
GRISS@UTAH-20 for "STANDARD-LISP" on PDP10, IBM370, etc
John Allen (who knows where?) for his "Cromemco" lisp on Z80 etc
JHL@MIT-AI (Joachim Laubsch, from Stuttgart, West Germany) who might be
able to involve the European LISP community.
I'll also send a letter of these actions to Shigeki Goto of the Nippon
Telephone Co. in Tokyo, who generated some sort of flurry last fall with his
incrediblly-simple "benchmark" function TAK. Actually, TAK may be useful as
one part of a multi-foliate benchmark, since it specifically test timings
for (1) function-to-function interface, and (2) simple arithmetic of GREATERP
and SUB1. Some of Baskett's benchmarkings score heavily on the array
capabilities, for which FORTRAN compilers "come off smelling like a rose",
and even the fast-arithmetic of MacLISP savors like a garbage dump.
At the little "lisp discussion" held in Salt Lake City, December 1980,
(attendees partly co-incident with LISP-DISCUSSION mailing list), Peter
Deutsch made a suggestion which we all liked, but for which there
has been no subsequent action (to my knowledge). Basically, in order to
educate ourselves into the consequences of the differences between LISP
dialects, and to get some experience in converting "real" code, each
dialect community should nominate a representative piece of "useful code"
from its enviromment, and the groups responsible for the other
dialects would try to "transport" it into their own. Several benefits
should accrue:
(1) If the "representative" is some useful piece of the general environment,
say like the DEFMACRO "cache'ing" scheme of MacLISP/NIL, or the
Interlisp Masterscope, or whatever, then the "transportation" cost
will be repaid by having a useful new tool in the other dialects.
(2) We should accumulate a library of automatic conversion tools, or
at least of written reports on the problems involved.
(3) Each community may be affected in a way which (hopefully) will help
reduce the hard-core interdialect incompatibilities.
(Apologies to Deutsch for any garbling of the proposal content).
∂27-Feb-81 2117 Howard I. Cannon <HIC at MIT-MC> Timings for LISP benchmarks
Date: 28 February 1981 00:17-EST
From: Howard I. Cannon <HIC at MIT-MC>
Subject: Timings for LISP benchmarks
To: rpg at SU-AI, deutsch at PARC-MAXC
cc: Greenberg.Symbolics at MIT-MULTICS
I suggest Greenberg.Symbolics@MIT-MULTICS for Multics MacLisp.
∂27-Feb-81 2131 CWH at MIT-MC (Carl W. Hoffman) Timings
Date: 28 FEB 1981 0030-EST
From: CWH at MIT-MC (Carl W. Hoffman)
Subject: Timings
To: RPG at SU-AI
Date: 27 Feb 1981 1354-PST
From: Dick Gabriel <RPG at SU-AI>
If anyone has any suggestions about who else to contact or other Lisps
and/or machines to try, let me know soon.
-rpg-
You might also contact Richard Lamson or Bernie Greenberg for timings of
MacLisp on various Multics sites. Net addresses are "Lamson at MIT-Multics"
and "Greenberg at MIT-Multics".
∂27-Feb-81 2201 CSVAX.fateman at Berkeley here's a test for you to look at/ distribute
Date: 27 Feb 1981 21:26:56-PST
From: CSVAX.fateman at Berkeley
To: rpg@su-ai
Subject: here's a test for you to look at/ distribute
;; test from Berkeley based on polynomial arithmetic.
(declare (special ans coef f inc i k qq ss v *x*
*alpha *a* *b* *chk *l *p q* u* *var *y*))
(declare (localf pcoefadd pcplus pcplus1 pplus ptimes ptimes1
ptimes2 ptimes3 psimp pctimes pctimes1
pplus1))
;; Franz uses maclisp hackery here; you can rewrite lots of ways.
(defmacro pointergp (x y) `(> (get ,x 'order)(get ,y 'order)))
(defmacro pcoefp (e) `(atom ,e))
(defmacro pzerop (x) `(signp e ,x)) ;true for 0 or 0.0
(defmacro pzero () 0)
(defmacro cplus (x y) `(plus ,x ,y))
(defmacro ctimes (x y) `(times ,x ,y))
(defun pcoefadd (e c x) (cond ((pzerop c) x)
(t (cons e (cons c x)))))
(defun pcplus (c p) (cond ((pcoefp p) (cplus p c))
(t (psimp (car p) (pcplus1 c (cdr p))))))
(defun pcplus1 (c x)
(cond ((null x)
(cond ((pzerop c) nil) (t (cons 0 (cons c nil)))))
((pzerop (car x)) (pcoefadd 0 (pplus c (cadr x)) nil))
(t (cons (car x) (cons (cadr x) (pcplus1 c (cddr x)))))))
(defun pctimes (c p) (cond ((pcoefp p) (ctimes c p))
(t (psimp (car p) (pctimes1 c (cdr p))))))
(defun pctimes1 (c x)
(cond ((null x) nil)
(t (pcoefadd (car x)
(ptimes c (cadr x))
(pctimes1 c (cddr x))))))
(defun pplus (x y) (cond ((pcoefp x) (pcplus x y))
((pcoefp y) (pcplus y x))
((eq (car x) (car y))
(psimp (car x) (pplus1 (cdr y) (cdr x))))
((pointergp (car x) (car y))
(psimp (car x) (pcplus1 y (cdr x))))
(t (psimp (car y) (pcplus1 x (cdr y))))))
(defun pplus1 (x y)
(cond ((null x) y)
((null y) x)
((= (car x) (car y))
(pcoefadd (car x)
(pplus (cadr x) (cadr y))
(pplus1 (cddr x) (cddr y))))
((> (car x) (car y))
(cons (car x) (cons (cadr x) (pplus1 (cddr x) y))))
(t (cons (car y) (cons (cadr y) (pplus1 x (cddr y)))))))
(defun psimp (var x)
(cond ((null x) 0)
((atom x) x)
((zerop (car x)) (cadr x))
(t (cons var x))))
(defun ptimes (x y) (cond ((or (pzerop x) (pzerop y)) (pzero))
((pcoefp x) (pctimes x y))
((pcoefp y) (pctimes y x))
((eq (car x) (car y))
(psimp (car x) (ptimes1 (cdr x) (cdr y))))
((pointergp (car x) (car y))
(psimp (car x) (pctimes1 y (cdr x))))
(t (psimp (car y) (pctimes1 x (cdr y))))))
(defun ptimes1 (*x* y) (prog (u* v)
(setq v (setq u* (ptimes2 y)))
a (setq *x* (cddr *x*))
(cond ((null *x*) (return u*)))
(ptimes3 y)
(go a)))
(defun ptimes2 (y) (cond ((null y) nil)
(t (pcoefadd (plus (car *x*) (car y))
(ptimes (cadr *x*) (cadr y))
(ptimes2 (cddr y))))))
(defun ptimes3 (y)
(prog (e u c)
a1 (cond ((null y) (return nil)))
(setq e (+ (car *x*) (car y)))
(setq c (ptimes (cadr y) (cadr *x*) ))
(cond ((pzerop c) (setq y (cddr y)) (go a1))
((or (null v) (> e (car v)))
(setq u* (setq v (pplus1 u* (list e c))))
(setq y (cddr y)) (go a1))
((= e (car v))
(setq c (pplus c (cadr v)))
(cond ((pzerop c) (setq u* (setq v (pdiffer1 u* (list (car v) (cadr v))))))
(t (rplaca (cdr v) c)))
(setq y (cddr y))
(go a1)))
a (cond ((and (cddr v) (> (caddr v) e)) (setq v (cddr v)) (go a)))
(setq u (cdr v))
b (cond ((or (null (cdr u)) (< (cadr u) e))
(rplacd u (cons e (cons c (cdr u)))) (go e)))
(cond ((pzerop (setq c (pplus (caddr u) c))) (rplacd u (cdddr u)) (go d))
(t (rplaca (cddr u) c)))
e (setq u (cddr u))
d (setq y (cddr y))
(cond ((null y) (return nil)))
(setq e (+ (car *x*) (car y)))
(setq c (ptimes (cadr y) (cadr *x*)))
c (cond ((and (cdr u) (> (cadr u) e)) (setq u (cddr u)) (go c)))
(go b)))
!
(defun pexptsq (p n)
(do ((n (quotient n 2) (quotient n 2))
(s (cond ((oddp n) p) (t 1))))
((zerop n) s)
(setq p (ptimes p p))
(and (oddp n) (setq s (ptimes s p))) ))
(defun setup nil
(putprop 'x 1 'order)
(putprop 'y 2 'order)
(putprop 'z 3 'order)
(setq r (pplus '(x 1 1 0 1) (pplus '(y 1 1) '(z 1 1)))) ; r= x+y+z+1
(setq r2 (ptimes r 100000)) ;r2 = 100000*r
(setq r3 (ptimes r 1.0)); r3 = r with floating point coefficients
)
; time various computations of powers of polynomials, not counting
;printing but including gc time ; provide account of g.c. time.
; The following function uses (ptime) for process-time and is thus
; Franz-specific.
(defun bench (n)
(setq start (ptime)) ; Franz ticks, 60 per sec, 2nd number is GC
(pexptsq r n)
(setq res1 (ptime))
(pexptsq r2 n)
(setq res2 (ptime))
; this one requires bignums.
(pexptsq r3 n)
(setq res3 (ptime))
(list 'power= n (b1 start res1)(b1 res1 res2)(b1 res2 res3)))
(defun b1(x y)(mapcar '(lambda(r s)(quotient (- s r) 60.0)) x y))
;instructions:
; after loading, type (setup)
; then (bench 2) ; this should be pretty fast.
; then (bench 5)
; then (bench 10)
; then (bench 15)
;...
∂27-Feb-81 2201 CSVAX.fateman at Berkeley Timings for LISP benchmarks, and reminder of a proposal by Deutsch
Date: 27 Feb 1981 21:32:33-PST
From: CSVAX.fateman at Berkeley
To: JONL@MIT-MC, rpg@SU-AI
Subject: Timings for LISP benchmarks, and reminder of a proposal by Deutsch
Cc: BEE@MIT-AI, JHL@MIT-AI, LISP-DISCUSSION@MIT-MC
I have sent an entry (polynomial arithmetic system) to rpg@su-ai.
He can examine and redistribute.
( fateman@berkeley is equivalent to csvax.fateman@berkeley...)
∂28-Feb-81 0916 NEDHUE at MIT-AI (Edmund M. Goodhue) Timings
Date: 28 FEB 1981 1215-EST
From: NEDHUE at MIT-AI (Edmund M. Goodhue)
Subject: Timings
To: RPG at SU-AI
I suggest you add Jim Meehan at UCI (maintainer of UCI LISP) who can
run benchmarks on UCILISP and MLISP on both TOP-10 and TOPS-20. UCI
is not on the net but he can be reached via MEEHAN@MIT-AI.
Ned Goodhue
∂28-Feb-81 1046 Barry Margolin <Margolin at MIT-Multics> Re: Timings
Date: 28 February 1981 1343-est
From: Barry Margolin <Margolin at MIT-Multics>
Subject: Re: Timings
To: RPG at SU-AI
Cc: info-lispm at MIT-AI
I think you should also contact someone at MIT-Multics, where they run
MacLisp, although I'm not sure who you should contact.
∂28-Feb-81 1109 Barry Margolin <Margolin at MIT-Multics> Re: Timings
Date: 28 February 1981 1343-est
From: Barry Margolin <Margolin at MIT-Multics>
Subject: Re: Timings
To: RPG at SU-AI
Cc: info-lispm at MIT-AI
I think you should also contact someone at MIT-Multics, where they run
MacLisp, although I'm not sure who you should contact.
∂28-Feb-81 1424 Deutsch at PARC-MAXC Re: Timings for LISP benchmarks, and reminder of a proposal by
Date: 28 Feb 1981 14:23 PST
From: Deutsch at PARC-MAXC
Subject: Re: Timings for LISP benchmarks, and reminder of a proposal by
Deutsch
In-reply-to: JONL's message of 27 FEB 1981 2352-EST
To: rpg at SU-AI, LISP-DISCUSSION at MIT-MC, BEE at MIT-AI, JHL at MIT-AI,
CSVAX.fateman at BERKELEY, RWS at MIT-XX
JONL accurately represented the content of my proposal. The set of programs
being submitted for timing tests might indeed be a useful place to start.
∂28-Feb-81 1718 YONKE at BBND JONL's message concerning benchmarks
Date: 28 Feb 1981 2009-EST
Sender: YONKE at BBND
Subject: JONL's message concerning benchmarks
From: YONKE at BBND
To: RPG at SU-AI, Lisp-Discussion at MIT-MC
Message-ID: <[BBND]28-Feb-81 20:09:20.YONKE>
I'd like to add Interlisp on Jericho (our in-house machine).
Also, since BBN has several different flavors of DEC hardware
which run TOPS-20, I wouldn't mind supplying these different
timings and they would probably more informative than Kurt's
(VanMelle) from SUMEX.
Martin
∂28-Feb-81 1818 CSVAX.fateman at Berkeley why I excluded GC times
Date: 28 Feb 1981 17:15:23-PST
From: CSVAX.fateman at Berkeley
To: HES@MIT-AI
Subject: why I excluded GC times
Cc: CSVAX.fateman@Berkeley, info-lispm@mit-mc, lisp-discussion@mit-mc
including GC times makes for a very messy statistical situation.
GC time (or even if it happens at all) is dependent on the virtual
address space in use at the time, how much of the macsyma system
has been loaded (in the case of the KL-10), etc. I do not know
about the LM figures, since I am only reporting stuff sent to me,
but the KL-10 and the VAX typically spend 30% additional time in
GC, averaged over various "production" runs. Trading off GC time
for system paging time is a funny business, though I agree it
is important.
∂28-Feb-81 2014 Guy.Steele at CMU-10A Re: Timings
Date: 28 February 1981 2313-EST (Saturday)
From: Guy.Steele at CMU-10A
To: Dick Gabriel <RPG at SU-AI>
Subject: Re: Timings
In-Reply-To: Dick Gabriel's message of 27 Feb 81 16:54-EST
Message-Id: <28Feb81 231341 GS70@CMU-10A>
You may want to get in touch with the people at Utah (Standard LISP)
for various machines, and maybe John Allen (who has implementations
for micros, for low end of curve).
Also let me note that you are likely to get a great CACM article or
soemthing out of distilling all this stuff if you want; more power
to you. I'll coordinate running tests on SPice LISP, though that
may take some time to materialize.
--QW
xxx
--Q
∂28-Feb-81 2016 Scott.Fahlman at CMU-10A benchmarks
Date: 28 February 1981 2315-EST (Saturday)
From: Scott.Fahlman at CMU-10A
To: rpg at su-ai
Subject: benchmarks
Message-Id: <28Feb81 231549 SF50@CMU-10A>
Hi,
I just added my name to Lisp discussion recently and seem to have missed
something. Exactly what benchmarks are you running/getting people to
run? If there was a message that kicked all of this off, I would be
interested in seeing it.
We will be happy to add Spice Lisp on Perq benchmarks when the time comes,
but we won't be ready till summer.
-- Scott
∂01-Mar-81 0826 PLATTS at WHARTON-10 ( Steve Platt) timing for lisp
Date: 1 Mar 1981 (Sunday) 1124-EDT
From: PLATTS at WHARTON-10 ( Steve Platt)
Subject: timing for lisp
To: rpg at SU-AI
...if the systems are not *too* big, I'd like to try them on my micro
(Z80) lisp.... rough limits -- stack is a few hundred calls deep (I can
relink to change this if necessary), cell space is limited to roughly
10K cells. Most basic major lisp functions (a la maclisp, for the most
part) are implemented, others can be added.
-Steve
∂01-Mar-81 1300 RJF at MIT-MC (Richard J. Fateman) more lisp mavens
Date: 1 MAR 1981 1600-EST
From: RJF at MIT-MC (Richard J. Fateman)
Subject: more lisp mavens
To: rpg at SU-AI
Try boyer@sri-kl. They have an F2, and Boyer undoubtedly
could supply theorem-prover benchmark.
∂02-Mar-81 0443 Robert H. Berman <RHB at MIT-MC> Timings
Date: 2 March 1981 07:43-EST
From: Robert H. Berman <RHB at MIT-MC>
Subject: Timings
To: RPG at SU-AI
cc: deutsch at PARC-MAXC
Please add me to your timing test survey. I have several
suggestions of features that I would like to know about.
Thanks.
--Bob
∂02-Mar-81 0543 Robert H. Berman <RHB at MIT-MC> Timings
Date: 2 March 1981 08:43-EST
From: Robert H. Berman <RHB at MIT-MC>
Subject: Timings
To: RPG at SU-AI
cc: deutsch at PARC-MAXC
Please add me to your timing test survey. I have several
suggestions of features that I would like to know about.
Thanks.
-Bob
∂02-Mar-81 0741 James E. O'Dell <JIM at MIT-MC> Timings
Date: 2 March 1981 10:40-EST
From: James E. O'Dell <JIM at MIT-MC>
Subject: Timings
To: Margolin at MIT-MULTICS
cc: RPG at SU-AI
Date: 28 February 1981 1343-est
From: Barry Margolin <Margolin at MIT-Multics>
To: RPG at SU-AI
cc: info-lispm at MIT-AI
Re: Timings
I think you should also contact someone at MIT-Multics, where they run
MacLisp, although I'm not sure who you should contact.
If the timings don't take too long to work up I'd be glad to run the
Multics Lisp trials. As you might know we have a Macsyma running there
now, version 293. It typically runs at .6 of a MC. The tricky thing is that
on some BIG problems it runs as fast or faster than MC because of its
larger address space. It spends less of its time collecting garbage than
on MC. I feel that this is an important factor.
At least on of the timings should CONS up a storm. We have had problems
with address space on both the LISPM and on 10's. Some large Macsyma
probems use up all of the address space on the LISPM because we don't run
with the garbage collector. GC'ing on the LISPM slows things down a lot.
I also think that the LISPM is being unfairly compared because of its
single user nature. The numbers do not accurately reflect the responsiveness
observed by the user.
∂02-Mar-81 1006 Deutsch at PARC-MAXC Re: Timings
Date: 2 Mar 1981 10:06 PST
From: Deutsch at PARC-MAXC
Subject: Re: Timings
In-reply-to: RPG's message of 27 Feb 1981 1354-PST
To: Dick Gabriel <RPG at SU-AI>
cc: Masinter
Please take me off the list of people doing Lisp timings. Larry Masinter or
someone else at PARC who is actively working on Lisp (which I am not) is more
appropriate.
∂02-Mar-81 1312 Barry Margolin <Margolin at MIT-Multics> Re: Timings
Date: 2 March 1981 1610-est
From: Barry Margolin <Margolin at MIT-Multics>
Subject: Re: Timings
To: JIM at MIT-MC
Cc: RPG at SU-AI
Bernie Greenberg has already been volunteered to do the Multics MacLisp
timings, although I'm sure he won't mind your help, especially when it
gets to Macsyma timings.
∂02-Mar-81 1634 RPG Lisp Timings
To: info-lispm at MIT-AI, lisp-discussion at MIT-AI,
"#TIMING.MSG[TIM,LSP]" at SU-AI
As most of you know, there will be an attempt made to do a
series of Lisp timings in which various benchmarks submitted by the
Lisp community are tested on a variety of different Lisp systems.
Since there will need to be some translations done in order to run
these benchmarks in systems for which they were not intended, there
is the secondary (!) problem of learning what is really needed to do
these translations more readily in the future.
I will be co-ordinating this effort and will be distributing
the results when they are in. For this purpose I have set up 3
mailing lists at Stanford:
LISPTIMING the list of people interested in this topic
LISPTRANSLATORS, the list of people who have volunteered
to do the timing tests (and translations)
at the various sites
LISPSOURCES the list of people who will be supplying
benchmarks
You can MAIL to these entities at SAIL (e.g. MAIL
LISPTIMING@SAIL...) and thus avoid swamping the mailing lists we
have beenusing so far.
If you care to be on one of these lists, please send me
(rpg@sail) your login name and site exactly as your mailer will
understand it along with which list you wish to be on. If you are
supplying programs or talent, please let me know which Lisp, which
machine, and which OS you are representing.
In addition, a list of all messages pertaining to this
extravaganza will be on TIMING.MSG[TIM,LSP] at SAIL (you can
FTP from SAIL without logging in). In general, this area will
contain all of the information, programs, and results for this
project.
If you know of anyone who is not on the net and who may be
able to help, send me a message and a method for getting in touch
with him/her. Over the next few days I hope to establish some of the
methodological considerations (such as GC times) for the project.
Dick Gabriel (RPG@SAIL)
∂03-Mar-81 1524 RPG Lisp Timing Mailing List
To: "@LSPTIM.DIS[P,DOC]" at SU-AI
Welcome to the Lisp Timing mailing list. As you may have
already guessed, the scope of the Lisp Timing Evaluation project is
very large in scope, and if we are to make a contribution to the
undertanding of how to evaluate such an elusive thing as an entire
computing environment we will need to consider many methodological
issues. Since I am no expert on such evaluations I am going to require
a good deal of help, and so far more than 20 people have volunteered.
The problems we face are not just how to measure the performance
of these Lisp systems, but how to take a diverse set of benchmark
programs and get them to run on systems very different than those they
were written for.
I hope at the end of this project to be able to report not
only times for programs, but descriptions of systems, translation
problems, and a general guide to the world of Lisp computing.
The first substantive mailing will be a quick list of
methodological points we need to consider. This list is not complete,
but aims at the directions we need to go before actual timing runs
can be performed.
Thank you for your help in this project.
Dick Gabriel (RPG@SAIL)
Here's the first message, which you missed:
∂03-Mar-81 1616 RPG Methodology considerations:
To: "@LSPTIM.DIS[P,DOC]" at SU-AI
1. GC time is critical. Every timing should include CPU time
as measured by the CPU clock plus GC time. If GC time is not
accounted in the LISP, we should include a standard test, such
as a program that creates a large, standard structure (balanced
tree of some sort?) and then count CPU time on a forced GC, resulting
in a seconds/cell figure for each machine. Maybe we should do this
in addition to the benchmarks? [In fact, measuring GC time in a meaningful
way is que difficult due to different algorithms. Perhaps a range of
tree structures? Maybe not all algorithms are symmetric on car/cdr?]
2. Translating non-standard control structures can be a problem.
What about non-local goto's ala catch/throw? These can be simulated
with ERROR/ERRSET or with spaghetti hackery in InterLisp. These questions
should be addressed by having each translator propose various techniques
and having the source decide on which to use. Or maybe we should use
all such methods?
3. All non-LISP syntax must be pre-expanded (i.e. CLISP) to allow
the local system to optimize as appropriate.
4. Both interpreted and compiled code will be timed.
All code will have macros pre-expanded (at local sites?) so that
efficiencies due to incremental destructive expansion can be
eliminated.
5. Numeric code should have all types announced to the translators by the
sources so that optimizations can be made without deductions.
All other such information must be provided.
6. The size of such programs can be arbitrary, though translating
MACSYMA may take a while to do.
7. All tools developed to aid translation should be forwarded to
RPG so that they may be evaluated and distributed if appropriate.
8. Programs that are useful to a source but impossible (in a
practical sense) to translate should merit special attention to
decide if there is a useful feature involved.
9. (from GLR)
Timing various programs is a good idea, but the data will
be a little hard to extrapolate. Is anyone going to measure
parameters such as CONS rate, time to invoke a procedure,
and add times? [Not only that, but number CONSing and its
effect on numeric calculations should be measured as well. Here
RPG will appoint some experts (like JONL) to make up some
good numeric testing code to isolate implementational problems
with specific aspects of Lisp).
10. People should supply some estimate of the runtime and the results
of their benchmarks. Such things as 2 minutes of CPU on a KL running
TOPS-10 is OK, but for unfamiliar machines/Lisps this may not be good enough.
Try to aim at some estimate in terms of the number of CONSes or function
call depth.
11. Every candidate system should have a detailed description of that
description (CPU architecture, memory size, address size, paging algorithm...)
∂04-Mar-81 0449 Robert H. Berman <RHB at MIT-MC> Lisp Timing Mailing List
Date: 4 March 1981 07:48-EST
From: Robert H. Berman <RHB at MIT-MC>
Subject: Lisp Timing Mailing List
To: RPG at SU-AI
cc: " @LSPTIM.DIS[P,DOC]" at SU-AI
May I suggest the following as a benchmark for numerically orientated
problems: the time it takes to do a fast fourier transform of, say length
1024, of real or complex data.
I have been collecting over a period of 6 years timings for this
statistics on a wide range of machines (nearly 50) and compilers,
assemblers etc. Thus, this benchmark would be very helpful
in relating Lisp machine performance to many other architectures.
I have a class of problems that I run that use transform methods
for solving partial differential equations and performing
covolutions and smoothing. Hence my interest in ffts.
Several points to keep in mind about this benchmark:
1. On LM's there is a difference between small flonums and flonums.
Suppose it were done with macsyma's bigfloat package to allow
for extended precision.
2. Fast Fermat (Integer) Transforms are also helpful here. Integers
in the range 0 to 2↑20, say, can be as useful as small
flonums, but they use only integer arithmatic.
3. Power of 2 transforms, and their families, radix 2, rdaix 4+2,
radix 8+4+2, etc, can do some of their by shifting, rather than
dividing. But other bases, i.e. 96 instead of 64 or 128, can be more
efficient than doubling the transform length.
4. The internal data representation can make a difference. Local
variables on the stack of a subroutine are faster to reference than
arrays. I understand there is an architecturial limit of 64 stack
variables on LM's. Would it ever to be possible to change it? In a 4+2
algorithm, the fastest trasnform using stack variables only could then
be a 256 length transform, and then there would a degradation for
longer transforms that used array references.
5. I don't have a completely good feeling yet for all of the
subtleties and speedups available for microcoding a problem
vs writing in lisp, interpreting, compiling, or compiling
into microcode. When a segment of code is going to be used over and
over again, and the code isn't going to change, shouldn't it be
in microcode?
6. I can make several fft packages avaialable in lisp now. One is a
naive radix 2 butterfly algorithm, designed to be short to write and
implement in a hurry. The second is a radix 4+2 and radix 96 familiy
of transforms that were writen for a vector architecure like the Cray,
but translated nearly literally into lisp. Because the Cray encourages
temporary vectors, this radix 4+2 algorithm uses a lot of storage,
rather than transforms in place. I have not yet looked into the issues
I raised in 4.or 5., but these need attention as well.
-- Bob Berman (rhb@mc)
∂04-Mar-81 0957 Scott.Fahlman at CMU-10A Re: Translators
Date: 4 March 1981 1212-EST (Wednesday)
From: Scott.Fahlman at CMU-10A
To: Dick Gabriel <RPG at SU-AI>
Subject: Re: Translators
CC: guy.steele at CMU-10A
In-Reply-To: Dick Gabriel's message of 3 Mar 81 19:22-EST
Message-Id: <04Mar81 121256 SF50@CMU-10A>
Dick,
I notice in an earlier message that it was contemplated that a full set of
timings be done on CMU's modified TOPS-10 system running MACLISP. As a
point of information, all serious Maclisp work here has been moved to the
2060, now that we have one. I think that running benchmarks for an obsolete
and obviously brain-damaged system which nobody should ever again be forced to
use for anything seriosu would be a waste of time, and I am not likely to
want to devote any effort to it (although the task would be relatively small
if we get things already translated into legal Maclisp, since the differences
are few). I could devote some small amount of effort to benchmarking TOPS-20
maclisp, though there are other sites that have this as well and I would prefer
that they carry a good deal of the load on this.
We are willing, even eager, to get timings for Spice Lisp on the extended PERQ
(once we get an extended PERQ), but this effort will lag the others by 6 months
of so while we get our act together. I would prefer to save our translation
and measurement cycles for that task, since lots of places can check out a
Maclisp.
All of this looks fairly interesting. It may generate more heat than light,
but at least there will be some data to base the flames on, and the translation
aids should be a very useful side effect.
-- Scott
∂04-Mar-81 0959 CSVAX.char at Berkeley lisp benchmarking
Date: 4 Mar 1981 09:00:47-PST
From: CSVAX.char at Berkeley
To: rpg@sail
Subject: lisp benchmarking
Cc: anlams!boyle@Berkeley, CSVAX.char@Berkeley, CSVAX.fateman@Berkeley
Richard Fateman has informed me of the effort you're organizing to
compare Lisp systems. James Boyle (csvax.anlams!boyle@BERKELEY) and I
(csvax.anlams!char@BERKELEY) would like to be put on your mailing list
for lisp benchmarking. We have a program, part of a program
transformation system, which you may be interested in including in the
benchmarking. It currently runs on Franz, and on the IBM370 Lisp
available at Argonne. We could create a special version of the code
that predefines variables instead of reading their values off of files;
I/O was the only real problem I had in converting the program to Franz
this past fall. It is an interesting program in that it is a "real"
application of Lisp -- people have used the transformation system for
development of math software here at Argonne, as preprocessor to a
theorem prover, etc. It is not so interesting from the viewpoint of
exercising a lot of different Lisp features -- mainly list access and
creation, and CONDing. Jim Boyle estimates that an interesting
benchmark run would take 30-60 min. of Vax cpu time running under Franz
(interpreted). This might be too long for benchmarking, if testing
resources are expensive.
∂04-Mar-81 1627 HEDRICK at RUTGERS sometime of possible interest
Date: 4 Mar 1981 1919-EST
From: HEDRICK at RUTGERS
Subject: sometime of possible interest
To: rpg at SU-AI
I am not entirely clear what is going on with your lisp timings
mailing list. However you may possibly be interested in
looking at the file [rutgers]<hedrick>newlisp. You can FTP it
without logging in I think. I you have to log on over FTP,
specify user name ANONYMOUS and any password. This describes
the various tests I have done during design of ELISP, the new
extended addressing version of UCI Lisp for Tops-20. I think
ELISP will not have much in the way of innovations. It in
intended to be quite "classical". I.e. something that we know
how to do, and know that the results of will be useful for us.
It is Lisp 1.6/UCI Lisp constructed with Lisp machine technology
(to the extent we can do it on the 20, no CDR-coding, since that
requires micro code changes. But we do using a copying GC and
everything is done with typed pointers.) I expect the performance to be
similar to that of UCI Lisp, as the basic structures will be the same.
It will differ mostly because of completely different data
representations and GC methods. And because of extended addressing,
which on the 20 still has performance problems. NEWLISP refers to these
problems without explaining them. The main problem is in the design of
the hardware pager. This is the thing that maps virtual to physical
addresses. It should be associative memory, but is implemented by a
table. The net effect of the table is that the same entry is used for
pages 1000, 3000, 5000, 7000, etc. In fact, which line in the table is
used is determined by bits 774 of the page number (i.e. pages
1000,1001,1002, and 1003 are all stored in the same line). There is a
kludge to prevent odd numbered sections from interfering with even
numbered ones (The section number is bits 777000), which is why I listed
pages 1000, 3000,etc., and not 0, 2000, ... If you happen to be
unlucky, and have code in page 1000, a stack in page 3000, and
data in page 5000, your code can easily run a factor of 20 times
slower than it would otherwise. By carefully positioning various
blocks of data most of the problems can be prevented.
Please not that ELISP is intended to be a quick and safe implementation.
That means that I am not trying to get the last few percent of efficiency.
I am doing things in ways that I believe will not require much debugging
time, even at the price of speed. This is because I am a manager, and
don't have much time to write code or to support it after it is finished.
-------
∂06-Mar-81 1301 HES at MIT-AI (Howard Shrobe) Methodology considerations:
Date: 6 MAR 1981 1556-EST
From: HES at MIT-AI (Howard Shrobe)
Subject: Methodology considerations:
To: RPG at SU-AI
Re your comment about including GC time. I agree wholheartedly and have been
having a bit of disagreemnet with Fateman about same. IN addition I would
suggest trying to get statistics on how time shared machines degrade with load.
A lot of folks are trying to make estimates of personal versus time shared and
such choices can only be made if you know how many people can be serviced by a
VAX (KL-10, 2060, etc.) before performance drops off. Some discussion of this
issue would be useful to such folks.
howie Shrobe
Subject: Lisp Timings Group
To: rpg at SU-AI
cc: correira at UTEXAS-11
Hi. I've been involved with the maintenance/extensions of two lisps, UTLISP
(on CDC equipment) and UCILISP (Rutgers Lisp, etc). One of the things that I
did in our version of UCILISP that was missed by Lefaivre (and, hence, Meehan)
was to speed up the interpreter. (Lefaivre got a copy of my source shortly
before I made the speed ups.) It actually wound up being a few percent faster
than MACLISP (both on the same TOPS-10 machine). (I believe MACLISP source
code is close enough to make the same changes - this was very old/unchanged
code in the interpreter.)
Anyway, I'd like to volunteer running the tests on UCI Lisp on both a 2060
(TOPS-20) and a KI-10 (TOPS-10). I'm a little hesitant about committing
myself to too much work but it looks like you'll have several people running
UCI Lisp so maybe the work will be spread around. (I guess this means that
you should add me to your LISPTIMING and LISPTRANSLATORS lists.)
For easily transportable code, I'll run it on UTLISP but for any extensive
changes I'll pass. The current person who is in charge of that Lisp may send
you a separate note. I've tried to encourage him to do so. The UTLISP was
(at one time) judged by the Japanese surveyers to be the fastest interpreted
Lisp. (That is my recollection of the first survey that we were involved in,
sometime about the mid 70's?. I'm sure it was solely due to the speed of the
hardware.) It is not an elegant Lisp and has a lot of faults but is a pretty
fast interpreter. The compiler is a crock - when it works. It was someone's
masters thesis in the early 70's.
I strongly suggest that you run each of the various Lisps on different CPUs
whenever possible. There was a note out last fall that compared Interlisp,
Maclisp, and UCI Lisp. You may remember that I sent out a note that
complained that the timings for UCI Lisp were obviously on a different CPU
(probably a KI-10 compared to KL-10 or 2060).
I also suggest that while general purpose benchmarks may show a general
tendency, we should strive for timings of specific operations. Such things as
CONS (including GC time), variable binding, function calling, arithmetic,
property list manipulation, array manipulation, stack manipulation (I guess
that's in function calling/variable binding), tree traversing (CAR/CDR
manipulations), FUNARG hacking, COND evaluations, PROG and looping hacking,
etc. Personally my programs don't use much arithmetic so I don't think that's
too important but obviously some people do.
It would also be useful if people could supply timings of the machine the LISP
is run on. Such things as instruction fetch times and memory speed are
obviously important. This might be useful in comparing two Lisps on different
machines. (Exactly how does a CYBER-170/750 compare with a DEC-2060?)
I don't think that the programs need to be very big or long-running. They
just need to run long enough (10 seconds?) to minimize minor timing problems.
The important thing is that the various programs concentrate on one specific
area as much as possible. Of course, all this needs to be balanced by some
programs that have a general mix of operations.
Another possible test, which is not really a timing test, would be to give all
us hackers some particular programming project which would take on the order
of an hour to do. We would each do it in our own Lisp and report how long it
took us to do it (clock time) and how much resources we used (CPU time). It
might be also reasonable to report how we did it (eg, used EMACS or some other
editor to write/fix the code versus edit in Lisp itself, how many functions
(macros?), how much commenting, how transparent/hackish the code is, etc.) I
don't mean that this should be a programming contest but it might give some
idea what is involved in writing a program in each Lisp. This involves
composing, executing, debugging, and compiling. I feel this would be a truer
test of a LISP in a typical research situation if we could (hah!) discount the
various programmers skills/resources. (This suggestion should really stir
up some flames!!)
Mabry Tyson
(tyson@utexas-11)
-------
∂10-Mar-81 0727 correira at UTEXAS-11 lisp timings
Date: 10 Mar 1981 at 0916-CST
From: correira at UTEXAS-11
Subject: lisp timings
To: rpg at su-ai
cc: atp.tyson at utexas-20
If anyone is interested, I would be willing to do the work to run the
timing programs for UTLISP Version 5.0. This is the latest version of
UTLISP, containing code to drag the dialect into the 20th Century of
LISP interpreters. It has been my experience in the past that
most people shrug UTLISP off with a "oh, that's the one with the extra
pointer field" comment, but I think it is a pretty good LISP now and should be
included in the timings effort. However, the compiler is still a complete
crock (although I am working on a new one, it won't be ready for at least
6 months), so I will pass on doing compiler timings. Please add my name to
the LISPTIMING and LISPTRANSLATORS mailing lists.
Alfred Correira
UTEXAS-11
-------
∂03-Mar-81 2109 Barrow at SRI-KL (Harry Barrow ) Lisp Timings
Date: 3 Mar 1981 1727-PST
From: Barrow at SRI-KL (Harry Barrow )
Subject: Lisp Timings
To: rpg at SU-AI
I would certainly like to be on your list of recipients of
LISP timing information. Please add BARROW@SRI-AI to your list.
Did you know that Forrest BAskett has made some comparative timings
of one particular program (cpu-intensive) on several machines, in
several languages? In particular, LISP was used on DEC 2060, KL-10,
KA-10, and MIT CADR machines (CADR came out comparable with a KA-10,
but about 50% better if using compiled microcode).
What machines do you plan to use? I would be very interested to
see how Dolphins, Dorados, and Lisp machines compare...
Harry.
-------
Yes, I know of Baskett's study. There is at least one other Lisp
study, by Takeuchi in Japan.
So far we have the following Lisp systems with volunteers to
do the timings etc:
Interlisp on MAX, Dolphin, Dorado
MacLisp on SAIL
InterLisp on SUMEX
UCILISP on Rutgers
SpiceLisp on PERQ
Lisp Machine (Symbolics, CADR)
Maclisp on AI, MC, NIL on VAX, NIL on S1 (if available)
InterLisp on F2
Standard Lisp on TOPS-10, B-1700, LISP370
TLC-lisp and muLisp on z-80
Muddle on DMS
Rutgers Lisp
Lisp Machine
UCILISP and MLISP on TOPS-10, TOPS-20
Jericho InterLisp
some Z80 LISP
Multics Maclisp
Cromemco Lisp on Z80
Franz Lisp on VAX UNIX
∂02-Mar-81 0004 Charles Frankston <CBF at MIT-MC> timings
Date: 2 March 1981 00:55-EST
From: Charles Frankston <CBF at MIT-MC>
Subject: timings
To: CSVAX.fateman at BERKELEY
cc: LISP-FORUM at MIT-MC, masinter at PARC-MAXC, RWS at MIT-XX,
guttag at MIT-XX
It is rather obvious that the timings you distributed are wall times for
the Lisp Machine, whereas the Vax and MC times count only time spent
directly executing code that is considered part of Macsyma. Ie. the
Vax and MC times exclude not only garbage collection, but operating system
overhard, disk i/o and/or paging, time to output characters to terminals, etc.
I submit comparing wall times with (what the Multics people call) "virtual
CPU" time, is not a very informative excercise. I'm not sure if the Lisp
Machine has the facilities to make analagous measurements, but everyone
can measure wall time, and in some ways thats the most useful comparison.
Is anyone willing to try the same benchmarks on the Vax and MC with just
one user on and measureing wall times?
Also, are there yet any Lisp machines with greater than 256K words? No
one would dream of running Macsyma on a 256K word PDP10 and I presume that
goes the same for a 1 Megabyte Vax. The Lisp Machine may not have a time
sharing system resident in core, but in terms of amount of memory needed
for operating system overhard, the fanciness of its user interface
probably more than makes up for that. I'll bet another 128K words of
memory would not be beyond the point of diminishing returns, insofar
as running Macsyma.
Lastly, the choice of examples. Due to internal Macsyma optimizations,
these examples have a property I don't like in a benchmark. The timings
for subsequent runs in the same environment differ widely from previous
runs. It is often useful to be able to factor out setup times from a
benchmark. These benchmarks would seem to run the danger of being dominated
by setup costs. (Eg. suppose disk I/O is much more expensive on one system;
that is probably not generally interesting to a Macsyma user, but it could
dominate benchmarks such as these.)
I would be as interested as anyone else in seeing the various lisp systems
benchmarked. I hope there is a reasonable understanding in the various
Lisp communities of how to do fair and accurate, else the results will be
worse than useless, they will be damaging.
∂17-Mar-81 1155 Masinter at PARC-MAXC Re: GC
Date: 17 Mar 1981 11:54 PST
From: Masinter at PARC-MAXC
Subject: Re: GC
In-reply-to: RPG's message of 16 Mar 1981 1234-PST
To: Dick Gabriel <RPG at SU-AI>
cc: LispTiming@su-ai, LispTranslators at SU-AI
Interlisp-D uses a reference-count garbage collection scheme. Thus, "garbage
collection" overhead is distributed to those functions which can modify reference
counts (CONS, RPLACA, etc.) with the following important exceptions:
no reference counts are maintained for small numbers or literal atoms
references from the stack are not counted
Reference counts are maintained in a separate table from the data being counted.
The table can be thought of as a hash table. In addition, the "default" entry in
the table is reference count = 1, so that in the "normal" case, there is no table
entry for a particular datum.
"Garbage collection" then consists of (a) sweeping the stack, marking data with a
"referenced from the stack" bit in the reference count table if necessary, (b)
sweeping the reference count table, collecting those data whose reference counts
are 0 and which are not referenced from the stack.
--------------
Because of this scheme, it is very difficult to measure performance of Interlisp-D
independent of garbage collection, because the overhead for garbage collection is
distributed widely (although the timing for the sweep phase can be separated
out).
Secondly, the choice of a reference count scheme over the traditional
chase-and-mark scheme used by most Lisps was conditioned by the belief that
with very large virtual address spaces, it was unreasonable to require touching
all active storage before any garbage could be collected.
This would indicate that any timings should take into consideration paging
performance as well as garbage collection overhead, if they are to accurately
consider the overall performance picture.
Larry
∂16-Mar-81 1429 HEDRICK at RUTGERS Re: Solicitation
Date: 16 Mar 1981 1725-EST
From: HEDRICK at RUTGERS
Subject: Re: Solicitation
To: RPG at SU-AI
cc: lispsources at SU-AI
In-Reply-To: Your message of 16-Mar-81 1526-EST
ELISP: extended R/UCI lisp. This will be a reimplementation of
Rutgers/UCI lisp for Tops-20 using extended (30-bit) addressing. It is
implemented using typed pointers and a copying GC, but will otherwise be
almost exactly the same as R/UCI lisp (unless you are accustomed to
CDR'ing into the innards of strings, etc.).
hardware - Model B KL processor or Jupiter. I am not clear whether
a 2020 has extended addressing. If so that would also be
usable.
OS - Tops-20, release 5 or later (release 4 useable with minimal
patching)
binding type- shallow dynamic, with same stack mechanisms as
UCI Lisp
compiler - Utah standard lisp transported to our environment
At the moment performance appears to be the same as R/UCI Lisp, except
that the GC takes about twice as long for a given number of CONS cells
in use. The time per CONS may be less for substantial programs, since
we can afford to run with lots of free space, whereas our big programs
are pushing address space, and may not be able to have much free space,
hence GC a lot.
At the moment I have an interpreter that does a substantial part of Lisp
1.6. I hope to finish Lisp 1.6 by the beginning of the summer. I also
hope to have a compiler by then. I am doing the interpreter personally,
and one of my staff is doing the compiler. I am implementing R/UCI
lisp roughly in historical order, i.e. Lisp 1.6 first, then UCI lisp,
then Rutgers changes, though a few later features are slipping in (and
I am not doing anything I will have to undo).
Note that I have little if any interest in performance. I want to match
R/UCI lisp, since users may complain if things suddenly slow down, but
that is about it. I am more concerned about reliability (since I will
have little time to maintain it) and how long it takes to write it
(since I have little time to write it). Our users are doing completely
traditional Lisp work, and have little or no interest in more flexible
binding or control semantics (we supplied a version of R/UCI lisp with
Scheme semantics, and no one was interested), nor in speed in
arithmetic. The system is designed to be modular enough that
improvements can be done as needed. I am giving some thought to
transportability, though not as much as the Utah folks. I think we
should be able to transport it to a system with at least 16 AC's and a
reasonable instruction set (e.g. VAX) with 2 man-months or less.
As far as the hardware we have available for testing, we will shortly
have 1M of MOS memory, 4 RP06's on 2 channel, and a model B KL processor
(the model matters since the model B is faster than the model A. Note
that the processor model number is almost the only variable you care
about in a 20, but it is not derivable from the DEC marketing
designation, since a 2050 or 2040 may be either model. However a 2060
is always model B).
-------
∂16-Mar-81 1433 HEDRICK at RUTGERS Re: GC
Date: 16 Mar 1981 1728-EST
From: HEDRICK at RUTGERS
Subject: Re: GC
To: RPG at SU-AI
cc: lisptranslators at SU-AI
In-Reply-To: Your message of 16-Mar-81 1534-EST
; the garbage collector. its init routine is called gcinit and
; takes these args:
; - the beginning of constant data space, which is really at the
; start of the first of the two data spaces
; - the first word beyond the constant data space, which is the
; beginning of the usable part of the first data space
; - the start of the second data space
; - the first word beyond the second data space
; garbage collector variables:
;free - last used location in data space
;lastl - last legal location in this data space - 1. Trigger a GC if
; someone tries to go beyond this.
;stthis - start of this data space
;enthis - end of this data space
;stthat - start of other data space
;enthat - end of other data space
;stcnst - start of constant space
;encnst - end of constant space
.scalar lastl,stthis,enthis,stthat,enthat,stcnst,encnst
freesz==200000 ;amount of free space at end of GC
<<<initialization code omitted>>>
;This is a copying GC, modelled after the Lisp Machine GC, as
;described in Henry Baker's thesis. There are two data spaces, old and new.
;A GC copies everything that is in use from old to new, and makes new the
;current one. The main operation is translating objects. If the object
;is absolute, e.g. an INUM, this is a no-op. Only pointers into the old
;space are translated. They are translated by finding the equivalent object
;in the new space, and using its pointer. There are two cases:
; - we have already moved the object. In this case the first entry of
; the old space copy is a pointer to the copy in new space. These
; pointers have the sign bit on, for easy detection.
; - we have not moved the object. In this case, we copy it to the end of
; new space, and use the pointer to the beginning of this copy.
;At any given time, we have a pointer into new space. Everything before
;this pointer has been translated. Everything after it has not. We also
;have to translate the stack and the constant area. Indeed it is translating
;these areas that first puts something into new space to translate.
mark==400000,,0 ;bit that says this has already been translated
;Because there are four different areas to translate, we have a separate
;routine to do the translation.
; gctran:
; w3 - first address to be translated. W2 is updated, and is the
; pointer mentioned above. I.e. everything before W2 has
; been translated
; w4 - last address to be translated.
;The code within gctran avoids the use of the stacks, in order to avoid
;performance problems because of addressing conflicts between the stack
;and the areas being GC'ed.
gctran: move o1,(w3) ;o1 - thing to be translated
gettyp o1 ;see what we have
xct trntab(w2) ;translate depending upon type
camge w3,w4 ;see if done
aoja w3,gctran ;no - next
ret
;GCTRAX - special version of the above for doing new space. Ends when
;we reach the free pointer
gctrax: move o1,(w3) ;o1 - thing to be translated
gettyp o1 ;see what we have
xct trntab(w2) ;translate depending upon type
camge w3,free ;see if done
aoja w3,gctrax ;no - next
ret
;;TYPES
trntab: jsp w2,cpyatm ; atom
jfcl ; constant atom
jsp w2,cpycon ; cons
jfcl ; constant cons
jsp w2,cpystr ; string
jfcl ; constant string
jsp w2,cpychn ; channel
jfcl ; constant channel
jfcl ; integer
jsp w2,cpyrea ; real
jrst 4,. ; hunk
jfcl ; address
jsp w2,cpyspc ; special
;here to translate a CONS cell - normally we copy it and use addr of new copy
cpycon: skipge o2,(o1) ;do we already have a translation in old copy?
jrst havcon ;yes - use it
dmove o2,(o1) ;copy it
dmovem o2,1(free)
xmovei o2,1(free) ;make address into CONS pointer
tlo o2,(object(ty%con,0))
movem o2,(w3) ;put it in place to be translated
tlc o2,(mark\object(ty%con,0)) ;make a pointer to put into old copy
movem o2,(o1) ;and put it there
addi free,2 ;advance free list
jrst (w2)
havcon: tlc o2,(mark\object(ty%con,0)) ;turn into a real cons pointer
movem o2,(w3) ;put in place to be translated
jrst (w2)
<<<the rest of the types are like unto this>>>
-------
∂16-Mar-81 1810 Scott.Fahlman at CMU-10A Re: GC
Date: 16 March 1981 2109-EST (Monday)
From: Scott.Fahlman at CMU-10A
To: Dick Gabriel <RPG at SU-AI>
Subject: Re: GC
In-Reply-To: Dick Gabriel's message of 16 Mar 81 15:34-EST
Message-Id: <16Mar81 210911 SF50@CMU-10A>
Dick,
I believe we gave you a copy of the SPice Lisp internals document? If so,
our GC algorithm is described there. We can run with GC turned off, though
we pay some overhead anyway. If incremental GC is turned on, the cost is
so spread out that it would be impossible to separate. Perhaps the only fair
thing to do, if the thingof interest ultimately is large AI jobs, is to run
big things only or smallthings enough times that a few GC will have happened.
Then you can just measure total runtime.
-- Scott
∂16-Mar-81 1934 PLATTS at WHARTON-10 ( Steve Platt) lisp -- my GC and machine specs
Date: 16 Mar 1981 (Monday) 2232-EDT
From: PLATTS at WHARTON-10 ( Steve Platt)
Subject: lisp -- my GC and machine specs
To: rpg at SU-AI
Dick, just a reminder about this all... it is all describing a
lisp for Z80 I'd like to benchmark out of curiosity's sake.
1) All times will have to be done via stopwatch. I might write a
quick (DO <n> <expr>) to repeat evaluation oh, say, 100 times or so
for better watch resolution. GC time will *have* to be included
as I don't seperate it out.
2) I plan to be speaking to John Allen about his TLC lisp -- as there;s
probably much similarity, I'd like to benchmark his at the same time.
I'll be sending him a copy of this letter.
3) GC is a simple mark'n'sweep. At some future time, I might replace
this with a compressing algorithm, makes core-image saving simpler.
I GC cons cells and atom space, but not number or string space (number
space for bignums (>1000 hex or so, use pointers for small integers),
string space for pnames.) Proper strings might be implemented in the
future sometime.
4) Lisp is an unreleased CDL lisp, still under development. It works
under CPM 1.4 or anything compatible with that, on a Z80. CDL Lisp has
its roots in Maclisp, I guess you'd say. Binding is deep. Compiler?
Hah -- maybe after my dissertation is finished... Macros -- the same.
I don't really view macros as essential, so they have a relatively low
priority... both have been thought about, but won't be benchmarkable.
5) The hardware environment is relatively constrained. 48K physically
right now, may be up to 60K by benchmark time... (this figures into
roughly 8K free cells, the additional 12K will add 3K cells...)
No cache, only 2 8" floppies. A typical "good" home system.
After reading this all, it's probably relatively depressing when
compared to some of the major machines being benchmarked. But it is
representative of the home computing environment...
If you have any more specific questions, feel free to ask.
-Steve Platt (Platts @ Wharton)
∂17-Mar-81 0745 Griss at UTAH-20 (Martin.Griss) Re: GC
Date: 17 Mar 1981 0835-MST
From: Griss at UTAH-20 (Martin.Griss)
Subject: Re: GC
To: RPG at SU-AI
cc: Griss at UTAH-20
In-Reply-To: Your message of 16-Mar-81 1334-MST
Standard LISP runs on a variety of machines, with existing LISPs, each with
a different GC; we will choose a machine set, and briefly decsribe;
What is standard AA analysis???
M
-------
∂17-Mar-81 0837 Robert S. Boyer <BOYER at SRI-CSL> Solicitation
Date: 17 March 1981 08:34-PST (Tuesday)
From: Robert S. Boyer <BOYER at SRI-CSL>
To: Dick Gabriel <RPG at SU-AI>
Cc: Boyer at SRI-CSL
Subject: Solicitation
The machine on which I can run LISP timings is a Foonly F2,
which emulates a DEC KA processor and a BBN pager, and runs
a variant of Tenex called Foonex. It has 1/2 million words
of 500 nanosecond memory, no cache, no drum, and a CDC
Winchester disk.
I have used Interlisp extensively, but I haven't studied the
compiler output or MACRO sources enough to claim expertese
at optimal coding.
I am marginally familiar with Maclisp now and I plan to
become more familiar soon.
For the purpose of getting a complete set of F2 vs. 2060
timings, I'd be willing to run tests of other PDP-10 LISPs
that are Tenex compatible, provided the tests can be
performed without too much understanding of the LISP
variants.
I have a benchmark that J Moore and I constructed a few
months ago to compare Interlisp and Maclisp. The files on
ARPANET host CSL named <BOYER>IREWRITE and <BOYER>MREWRITE
contain, respectively, Interlisp and Maclisp code for a far
from optimal rewrite style theorem prover. (To FTP log in
as Anonymous, password foo.) MREWRITE is coded so that,
except for the statistics gathering, it is also in Franz
LISP. To start, you invoke (SETUP). Then run (TEST), as
many times as you want. TEST returns some statistics -- but
I assume that RPG will want to standardize here. (TEST)
turns over storage very rapidly, recurses a lot, does very
little arithmetic, and engages in no fancy structuring (e.g.
RPLACs). Our intention in coding TEST was to produce
quickly a small facsimile of the heart of our rather large
theorem-proving system in order to compare LISP times.
By intentionally coding a program that would be easy to
translate from Interlisp to Maclisp, we did injustice to
both LISPs. For example, we used recursion where we might
have used the I.S.OPR construct in Interlisp or the DO
construct in Maclisp -- or a MAP construct in either.
∂17-Mar-81 0847 Robert S. Boyer <BOYER at SRI-CSL> LISP Timings
Date: 17 March 1981 08:43-PST (Tuesday)
From: Robert S. Boyer <BOYER at SRI-CSL>
To: RPG at SU-AI
Subject: LISP Timings
cc: Boyer at SRI-CSL
Could we include a cost column in the final grand tally? It
has been remarked that many people are trying to decide
which LISP system to use, now and in the future. Cost will
be an important criterion. Maintenance charges should be
included since over the life of a machine, they may approach
the purchase price. It should be relatively easy for each
person who voluteers a machine to indicate the purchase
price and maintenance charges.
∂17-Mar-81 1155 Masinter at PARC-MAXC Re: GC
Date: 17 Mar 1981 11:54 PST
From: Masinter at PARC-MAXC
Subject: Re: GC
In-reply-to: RPG's message of 16 Mar 1981 1234-PST
To: Dick Gabriel <RPG at SU-AI>
cc: LispTiming@su-ai, LispTranslators at SU-AI
Interlisp-D uses a reference-count garbage collection scheme. Thus, "garbage
collection" overhead is distributed to those functions which can modify reference
counts (CONS, RPLACA, etc.) with the following important exceptions:
no reference counts are maintained for small numbers or literal atoms
references from the stack are not counted
Reference counts are maintained in a separate table from the data being counted.
The table can be thought of as a hash table. In addition, the "default" entry in
the table is reference count = 1, so that in the "normal" case, there is no table
entry for a particular datum.
"Garbage collection" then consists of (a) sweeping the stack, marking data with a
"referenced from the stack" bit in the reference count table if necessary, (b)
sweeping the reference count table, collecting those data whose reference counts
are 0 and which are not referenced from the stack.
--------------
Because of this scheme, it is very difficult to measure performance of Interlisp-D
independent of garbage collection, because the overhead for garbage collection is
distributed widely (although the timing for the sweep phase can be separated
out).
Secondly, the choice of a reference count scheme over the traditional
chase-and-mark scheme used by most Lisps was conditioned by the belief that
with very large virtual address spaces, it was unreasonable to require touching
all active storage before any garbage could be collected.
This would indicate that any timings should take into consideration paging
performance as well as garbage collection overhead, if they are to accurately
consider the overall performance picture.
Larry
∂17-Mar-81 1218 RPG Bureaucracy
To: lisptiming at SU-AI
In sending mesages around, the following facts are useful:
RPG is on LISPSOURCES which is equal to
LISPTRANSLATORS, which is a subset of LISPTIMING.
So there is no need to send me a copy of everything, nor
is it necessary to have LISPTIMING and LISPSOURCES on the same
header, for example. Thanks.
-rpg-
∂17-Mar-81 1921 Bernard S. Greenberg <Greenberg at MIT-Multics> Re: Solicitation
Date: 17 March 1981 2142-est
From: Bernard S. Greenberg <Greenberg at MIT-Multics>
Subject: Re: Solicitation
To: lispsources at SU-AI
Cc: Multics-Lisp-people at MIT-MC
Well, Multics MacLisp, letsee:
Multics Maclisp, consisting of an interpreter, compiler, LAP (not used
by the compiler, tho), runtime, and utilities, was developed by
MIT Lab for Computer Science (LCS) in 1973 with the aim of exporting
the Macsyma math system to Multics (of which MIT-Multics was the only
one at the time). Dave Reed (now at LCS) and Dave Moon (now at MIT-AI
and Symbolics, Inc.) were the principal implementors then, and
Alex Sunguroff (don't know where he is now) to a lesser degree.
Reed and Moon maintained it to 1976, I maintained it until now.
Its maintenance/support status since my flushance of Honeywell
(December 1980) is now up in the air, although Peter Krupp
at Honeywell is now nominally maintainer.
The interpreter and general scheme of things were developed partly
on the experience of PDP-10 Maclisp, visavis running out of space,
and an earlier Multics Lisp by Reed, visavis better ways to do this
on Multics. Multics MacLisp features virtually infinite address
space (limited by the size of a Multics Process directory, which
is virtually unlimited), a relocating/copying garbage collector,
strings, bignums and other MacLisp features, general compatibility
with (ITS) MacLisp, and very significantly, the facility to interface
to procedures in other languages (including Multics System routines)
on Multics.
With the notable exception of the compiler, which is a large (and
understandable, as well as effective) Lisp program of two large
source files, the system is in PL/I and Multics assembler: the
assembler portions, including notably the evaluator, are that
way for speed. The language was designed to be as close to
ITS Maclisp as possible at the time (1973), but has diverged some.
The compiler was developed as two modules, a semantics pass
reworked from the then-current version of the fearsome ITS
COMPLR/NCOMPLR (1973), and the code generator was written anew
by Reed (1973), although it uses NCOMPLR-like strategies
(I have a paper on this subject).
Although used in the support of Macsyma, the largest and most important
use of Multics Maclisp is as the implementation and extension language
of the Multics Emacs "text processing and video process management"
system. Other large subsystems in Multics Maclisp over the years
have included a Multics crash and problem analysis subsystem and
a management-data modeling system (KOMS, about which I know little).
Pointers in Multics Maclisp are 72-bit, which includes a 9-bit
type field. Non-bignum numbers (fixna and flona) are directly
encoded in the pointer, and do not require allocation, or the
hirsute "PDLNMK" scheme of ITS MacLisp. Symbols and strings are
allocated contiguously, and relocated at garbage-collect time.
Binding is the standard MacLisp shallow-binding (old values
saved on PDL, symbol contains "current" value). Other Maclisp
language accoutrements (property lists, functional properties,
MacLisp macros, etc.) exist.
"A description of my OS:"
Well, the Multics Operating System enjoys/suffers a paged,
segmented virtual memory, implementing virtual storage and virtual
file access in a unified fashion. The paradigm is so well-known
that I cannot bear to belabor it any more. The net effect
on Lisp is a huge address space, and heavy interaction
between the GC algorithm and performance. Multics will run
in any size memory between 256K words and 16 million (36 bit
words) The Multics at MIT (there are about three dozen multices
all over the world now) has 3 million words of memory,
which I believe is 1 microsecond MOS. The MIT configuration runs
3 cpus - other sites vary between 1 and 5. The cache per
CPU is 2k words, and is "very fast", but the system gets CPU limited,
and can rarely exceed 1 MIP per cpu (highly asynchrounous processor),
although powerful character and bit string handling instructions
can do a lot faster work than a 1 mip load/store chain. You
wanted to know a bout disks:
Date: 16 March 1981 22:54 est
From: Sibert (W. Olin Sibert)
An MSU0451 has 814 cylinders, of 47 records each. Its average seek time
is 25 ms. (I don't know whether that's track-to-track, 10 percent, or
half platter -- I'll bet it's track-to-track, though). Its average
rotational latency is 8.33 ms. Its transfer rate is about 690K 8bit
bytes (614K 9bit bytes) per second, or 6.7 ms. per Multics record.
[1024 words]
I cannot really think of benchmark possibilities that would
show the performance of Multics MacLisp to great advantage.
For all its virtual memory, the antiquated basic architecture
of the Honeywell 6000 series (from the GE600) provides a
hostile environment to the Lisp implementor. Only one register
(AQ) capable of holding a full Lisp pointer exists, and this
same register is the only one you can calculate in, either.
Thus, the compiler can't do useful register optimization
or store-aviodance, and comes nowhere near NCOMPLR, which
is using the same techniques to implement the same language,
in the performance of its object code.
MacLisp type and array declarations are supported, and utilized
in the straightforward way by the compiler to improve generated code,
but in no way could it be claimed that what it generates is
competitive.
Multics MacLisp is "owned by MIT. It is distributed by MIT to anyone
who wants. It is part of some Honeywell products [Emacs], and is
supported by Honeywell to the extent and only to the extent necessary
to keep these products operative. Honeywell can distribute it,
but may not charge for it, but may charge for products written it it".
Although its support is a current hot potato, interest in using
Multics Maclisp is continually growing, and interesting subsystems
in it are being developed as of this writing.
Anything else?
∂31-Mar-81 1451 RPG Timing Benchmarks
To: lisptiming at SU-AI
Since I haven't gotten much in the way of volunteered benchmarks
yet, I propose to begin to write some myself and with the help of
some of you. Here's the initial list of things I want to test the
speed of:
Array reference and storage (random access)
Array reference and storage (matrix access)
Array reference and storage (matrix inversion)
Short list structure (records, hunks...)
Long list structure (cdr access)
CAR heavy structures
CDR heavy structures
Interpreted function calls
Compiled function calls
Smashed function calls
Table function calls (FUNCALL, SUBRCALL)
Tail recursion (?)
Block compiling
Reader speed
Property list structures
Atom structures (saturated obarrays)
Internal loops
Trigonometric functions
Arithmetic (floating and fixed)
Special variable lookup
Local variable lookup
CONS time
GC time
Compiled code load time
EQ test time
Arithmetic predicates
Type determination
Suggestions solicited.
-rpg-
∂01-Apr-81 1550 Masinter at PARC-MAXC
Date: 1 Apr 1981 15:49 PST
From: Masinter at PARC-MAXC
To: LispTiming at SU-AI
These are numbers that I generated in late 1977, measuring instruction
counts for various Interlisp-10 operations. One thing to be careful of in
measuring Interlisp-10 is to watch whether the functions are swapped
or not.... it makes a big difference. I suggest Interlisp-10 timings should
be made (at least once) with NOSWAPFLG set to T before the timed
program is loaded in.
------ begin forwarded message -------
I have just made some measurments of how many instructions it takes
to do various things in LISP, and I thought they might be of general
interest.
All measurements are in number of PDP-10 instructions, taking
no account of the relative speed of those instructions.
Measurements for Maxc (which has some special PDP-10 mode
instructions to improve function call performance) are given in
parentheses.
To call a non-swapped compiled function (not in a block) which has
all of its args LOCALVARS takes 50 instructions. (28 on Maxc)
{note that in this and subsequent figures, the time "to call" something
also includes the time to return from it}
To call a SUBR of 1 argument takes 56 instructions. (30 on maxc)
To call a function in the same block where the called function
has all of its args LOCALVARS takes 4 instructions + 1 for each
formal argument.
If the called function has any of its arguments SPECVARS then
it takes 57 instructions plus 12 for each SPECVAR arg and 2 for
each non-specvar arg. To bind variables with a PROG is roughly
the same. (this is 25+9/specvar on Maxc)
Block entry takes 69 instructions, i.e. (BLOCK (FOO FOO)) then
to call FOO will take 19 more instructions than (BLOCKS (NIL FOO
(LOCALVARS . T)))
(this is 45 on Maxc, i.e. about 17 more for block entry).
{you want to do the former if FOO calls itself recursively, though}.
To do a BLKAPPLY* takes 80 instructions + 3 per entry on blkapplyfns
which must be skipped (i.e. if you BLKAPPLY 'FOO and FOO is the
third entry on BLKAPLYFNS then this is 6 extra instructions).
(same on Maxc)
To call a SWAPPED function takes at least 86 additional instructions
per call. This is independent of whether the called function is
a block or a simple function, etc.
A LINKED function call takes 10 more instructions than a non-linked
function call. You should therefore always put (NOLINKFNS . T)
in your blocks declaration unless you have a specific
reason for wanting the calls linked.
∂05-Apr-81 2141 JHL via LONDON
To: lisptiming at SU-AI
how about including:
environmet switching (stack-groups, eval with alist (ptr),
closure, etc)
variable lookup within switched environment
primitives on strings, bits, bytes seem to be missing
∂05-Apr-81 2217 Carl Hewitt <CARL at MIT-AI> Lisp Timing Mailing List
Date: 6 April 1981 01:08-EST
From: Carl Hewitt <CARL at MIT-AI>
Subject: Lisp Timing Mailing List
To: RPG at SU-AI
cc: HEWITT at MIT-AI, " @LSPTIM.DIS[P,DOC]" at SU-AI
Dick,
Please change my name on the mailing list to CARL-JUNK
so that receiving mail doesn't interrupt me on line.
Thanks,
Carl
∂06-Apr-81 1302 RPG Timing benchmark
To: "@LSPTRN.DIS[P,DOC]" at SU-AI
The following is the first of the timing benchmarks to be tried. As such
it is fairly simple. It is simply a combinatorial pairing function that
takes 2 sets (represented as lists), a matching function, and some other
constraints, and produces a set of possible pairings of items from each
set. The example below produces 2592 possible pairings. I've included the
entire testing program, which is at the bottom, along with the test data,
which are stored in global variables. Below is reproduced the timings from
the SAIL KL running with a load average of .75. The output of the test
program is the number of pairings, the runtime (EBOX time on the KL), and
the gctime (EBOX time). The first run involves COREing up in response to
list space exhaustion, which results in the large gctime for the first
run: the other runs are in the resulting core images. I suggest you also
run it a few times to get a stable set of readings.
It would be nice to get some results from you for the LISP meeting at SRI
on wednesday, but that may not be possible.
-rpg-
2592
(RUNTIME 1.948) ;in seconds
(GCTIME 29.711)
2592
(RUNTIME 1.887)
(GCTIME 2.599)
2592
(RUNTIME 1.886)
(GCTIME 2.565)
2592
(RUNTIME 1.892)
(GCTIME 1.922)
2592
(RUNTIME 1.895)
(GCTIME 1.973)
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
(DEFUN PAIRS (X Y MUST-APPEAR FUN APPLY-CONSTRAINTS CONSTRAINTS
NIL-PAIRS)
((LAMBDA (XXX)
(MAPCAN
(FUNCTION(LAMBDA (I)
(PROGN
(COND
(MUST-APPEAR
(*CATCH
'OUT
(PROGN
(MAPC
(FUNCTION(LAMBDA (I) (COND ((MEMBER (CDR I) MUST-APPEAR)
(*THROW 'OUT T)))))
I)
NIL)))
(T)))
(LIST I)))
XXX))
(MAPCAR (FUNCTION(LAMBDA (I) (CDR I)))
(COND ((< (LENGTH X)
(+ (COND (NIL-PAIRS 1) (T 0)) (LENGTH Y)))
(PAIRS1 (MAKE-POSSIBILITY-1 X
Y
FUN
APPLY-CONSTRAINTS
CONSTRAINTS
NIL-PAIRS)))
(T (PAIRS2 (MAKE-POSSIBILITY-2 Y
X
FUN
APPLY-CONSTRAINTS
CONSTRAINTS
NIL-PAIRS)))))))
(DEFUN MAKE-POSSIBILITY-1 (X Y FUN APPLY-CONSTRAINTS CONSTRAINTS
NIL-PAIRS)
((LAMBDA (N)
((LAMBDA (Q)
(COND
(NIL-PAIRS (MAPC (FUNCTION(LAMBDA (I) (RPLACD I
(LIST* '(NIL)
(CDR I)))))
Q))
(Q)))
(MAPCAN
(FUNCTION(LAMBDA (I)
(PROGN
(SETQ N 0)
((LAMBDA (A) (AND A
(OR (NULL CONSTRAINTS)
(NULL APPLY-CONSTRAINTS)
(FUNCALL APPLY-CONSTRAINTS
CONSTRAINTS))
(LIST (LIST* I A))))
(MAPCAN
(FUNCTION(LAMBDA (J) ((LAMBDA (Q) (COND (Q (NCONS Q))))
(PROGN (SETQ N (1+ N))
(COND ((OR (NULL FUN)
(FUNCALL FUN I J))
(LIST* N J)))))))
Y)))))
X)))
0))
(DEFUN MAKE-POSSIBILITY-2 (X Y FUN APPLY-CONSTRAINTS CONSTRAINTS
NIL-PAIRS)
((LAMBDA (N)
((LAMBDA (Q)
(COND
(NIL-PAIRS (MAPC (FUNCTION(LAMBDA (I) (RPLACD I
(LIST* '(NIL)
(CDR I)))))
Q))
(Q)))
(MAPCAN
(FUNCTION(LAMBDA (I)
(PROGN
(SETQ N 0)
((LAMBDA (A) (AND A
(OR (NULL CONSTRAINTS)
(NULL APPLY-CONSTRAINTS)
(FUNCALL APPLY-CONSTRAINTS
CONSTRAINTS))
(LIST (LIST* I A))))
(MAPCAN
(FUNCTION(LAMBDA (J) ((LAMBDA (Q) (COND (Q (NCONS Q))))
(PROGN (SETQ N (1+ N))
(COND ((OR (NULL FUN)
(FUNCALL FUN J I))
(LIST* N J)))))))
Y)))))
X)))
0))
(DEFUN PAIRS1 (L)
(COND
((NULL L) '((NIL)))
(T
((LAMBDA (CAND POSS)
(MAPCAN
(FUNCTION(LAMBDA (PAIRS)
(PROGN
((LAMBDA (AVOID ANS)
(MAPCAN
(FUNCTION(LAMBDA (I)
((LAMBDA (Q) (COND (Q (NCONS Q))))
(PROGN (COND ((CAR (MEMBER (CAR I)
AVOID))
(LIST* AVOID ANS))
(T (LIST* (LIST* (CAR I)
AVOID)
(LIST* CAND
(CDR I))
ANS)))))))
POSS))
(CAR PAIRS)
(CDR PAIRS)))))
(PAIRS1 (CDR L))))
(CAAR L)
(CDAR L)))))
(DEFUN PAIRS2 (L)
(COND
((NULL L) '((NIL)))
(T
((LAMBDA (CAND POSS)
(MAPCAN
(FUNCTION(LAMBDA (PAIRS)
(PROGN
((LAMBDA (AVOID ANS)
(MAPCAN
(FUNCTION(LAMBDA (I)
((LAMBDA (Q) (COND (Q (NCONS Q))))
(PROGN (COND ((CAR (MEMBER (CAR I)
AVOID))
(LIST* AVOID ANS))
(T (LIST* (LIST* (CAR I)
AVOID)
(LIST* (CDR I)
CAND)
ANS)))))))
POSS))
(CAR PAIRS)
(CDR PAIRS)))))
(PAIRS2 (CDR L))))
(CAAR L)
(CDAR L)))))
(declare (special a b))
(setq a '(
(1 2)
(7 8)
(9 0)
(a b c)
(a b c)
(d e f)
(d e f)
(g h i)
(g h i)
(j k l)
(m n o)
(p q r)
))
(setq b '(
(a b c)
(j k l)
(d e f)
(p q r)
(g h i)
(9 0)
(a b c)
(p q r)
(7 8)
(j k l)
(2 1)
(3 2)
(8 7)
(9 8)
(0 9)
(m n o)
(d e f)
(j k l)
(m n o)
(d e f)
(p q r)
(g h i)
))
(defun test ()
((lambda (t1 x gt)
(setq x (pairs a b () 'equal () () ()))
(setq t1 (- (runtime) t1))
(setq gt (- (status gctime) gt))
(print (length x))
(print (list 'runtime
(QUOTIENT (FLOAT (- t1 gt))
1000000.)))
(print (list 'gctime
(quotient (float gt) 1000000.))))
(runtime) ()(status gctime)))
∂06-Apr-81 2007 RPG
To: lisptranslators at SU-AI
Here's the real timing stuff. As I pointed out, the old RUNTIME
(which is what RUNTIME in MacLisp here gives) is EBOX time (excluding
all memory time). Also, COMPILE the functions. The initial run
on SAIL does many CORE UUOs, which are some page creation stuff on ITS,
so it may run very slowly. The total runtime here at SAIL is given
by adding the GCTIME and WTIME entries below.
This program is henceforth called: ``SAIL constraint combinatorial pairing
program'' or SCCPP.
-rpg-
RUNTIME = EBOX time
WTIME = EBOX + memory time (approx.)
2592 ;number of pairings
(RUNTIME 1.969) ;EBOX time in seconds
(GCTIME 29.914) ;GCTIME in seconds
(WTIME 25.8693333) ;EBOX + MEMORY time in seconds
2592
(RUNTIME 1.903)
(GCTIME 2.616)
(WTIME 5.334)
2592
(RUNTIME 2.008)
(GCTIME 2.61)
(WTIME 5.59000003)
2592
(RUNTIME 1.959)
(GCTIME 2.065)
(WTIME 5.86833334)
2592
(RUNTIME 1.904)
(GCTIME 1.921)
(WTIME 5.1623333)
∂05-Apr-81 0208 H at MIT-AI (Jack Holloway) lisp timings
Date: 5 APR 1981 0508-EST
From: H at MIT-AI (Jack Holloway)
Subject: lisp timings
To: rpg at SU-AI
Out of curiosity, you might try to get Craig Reynolds at III
to run some timings of Maclisp on the Foonly F-1. The machine
is roughly 2 to 2.5 times a KL-10 for some things.
I'm not sure he has a net address, but you could get
in contact with him thru Dave Dyer at ISI.
∂06-Apr-81 1410 HEDRICK at RUTGERS Re: Timing benchmark
Date: 6 Apr 1981 1701-EST
From: HEDRICK at RUTGERS
Subject: Re: Timing benchmark
To: RPG at SU-AI
In-Reply-To: Your message of 6-Apr-81 1602-EST
Any chance I could get you to stick to functions defined in McCarthy?
I can guess what most of them are, but it would be better no to have
to guess. If you would like to send me a copy of the Maclisp manual
(if there is a Maclisp manual), that would be OK, too.
Also, when you say E-box time, what do you mean? If you mean E-box
ticks, converting those to time is non-straightforward. What conversion
do you use? If that is what you want, it will favor Elisp, since
using E-box ticks will eliminate the overhead due to pager refills,
which is what slows us down compared to non-extended Lisp.
I will try to figure out your functions and run them tonight. However
I do not keep separate GC timing yet, so you probably won't get that.
-------
1. I think it is specifically a bad idea to stick to McCarthy functions
because we are doing ``real programs''. For each non-standard function
we can provide a definite semantics; if your (generic) LISP cannot deal with
it, then that is good specific knowledge.
2. It is exactly the EBOX ticks, ignoring memory time. But we don't
page (or swap) so this isn't too outrageous. Currently there is
only one very informal way to measure memory time, which I will
include later on in the real timing results: what I sent was
simply an indication for you to judge whether your LISP is
running the problem correctly.
3. We will need to devise a separate GC time test. I provided it because it
was a superset of the information I'd like to get from all of you.
-rpg-
∂06-Apr-81 1931 Bernard S. Greenberg <Greenberg at MIT-Multics> Re: Timing benchmark
Date: 6 April 1981 2147-est
From: Bernard S. Greenberg <Greenberg at MIT-Multics>
Subject: Re: Timing benchmark
To: RPG at SU-AI
Cc: "@LSPTRN.DIS[P,DOC]" at SU-AI
I ran this program three times on MIT-Multics. Heres what it said.
Runtime (secs) 86.4 86.4 86.8
gctime (secs) 2.4 3.8 2.5 (41 users out of max
set at 120)
Before we accept that this implementation is really 60 times
slower than MACLISP on SAIL, I would like to point out that
the unmodified program, sent in the mail, also ran on AI-ITS
MACLISP, also compiled, for FIVE SOLID WALL-CLOCK MINUTES (as
it did on Multics) without opening its mouth, but I quit it
before it finished on AI (several times). The KA-10 is reported
to be 2 or 3 times slower (instruction rate) than Multics.
The KL-10 at sail, given all benefit of the doubt, is NOT
TWO ORDERS OF MAGNITUDE faster than the AI KA-10.
Has anyone else encountered difficulty in making this program run
in small number of seconds of CPU time? Perhaps there is some
subtle conversion problem I missed in my perusal of this program?
(I made no modifications other than converting the characters to
lower-case, and on Multics, macroing *catch/*throw to catch/throw).
∂06-Apr-81 2008 HEDRICK at RUTGERS Re: Timing benchmark
Date: 6 Apr 1981 2307-EST
From: HEDRICK at RUTGERS
Subject: Re: Timing benchmark
To: RPG at SU-AI
In-Reply-To: Your message of 6-Apr-81 1602-EST
I translated your benchmark to R/UCI Lisp. The only non-obvious
translation was due to the fact that in R/UCI Lisp (as in all Lisp 1.6
derivatives) there can only be 5 arguments to compiled functions.
Fortunately the arguments beyond the 4th were always NIL in your case,
so I just eliminated them. (R/UCI Lisp has a special kind of function,
as LEXPR, that allows more than 5 arguments. However its use did not
seem necessary in this case.)
Totals, including GC:
R/UCI Lisp (with free space expanded by 50K):
interpreted: 15.0
compiled: 4.6
", NOUUO: 3.2 (of which .6 is GC)
By NOUUO I mean that linkage between compiled functions is by direct
PUSHJ, not going through the intepreter. This makes tracing and
breaking impossible. (In Elisp we will use a protocol that does not
have this problem.) Note that total runtimes are slightly better than
RPG's MACLisp timings. However more of it is runtime and less is GC.
I conjecture that this will be typical of Lisp programs whose only
arithmetic involves small integers. MACLisp will produce better
code for small integers, but will have to box and unbox them when returning
from functions or putting them into data structures, causing faster
runtime but more GC time. The first call is no different than others
because in R/UCI Lisp there is no automated expansion. We had to
explicitly expand free storage by 50K before running.
Elisp (extended addressing Lisp) does not yet have a compiler.
Therefore some of the system functions (e.g. MEMBER, CADR) are running
interpreted. This slows things down noticably. To get an idea of how
Elisp is going to work out, I compared it with a copy of R/UCI Lisp in
which the same functions are being interpreted. [The temptation is
great to simply code these things in assembly language, since there are
really only a few at this point. However I will attempt to resist this
temptation and continue to compare Elisp with this semi-interpreted
R/UCI Lisp.] Elisp uses dynamic expansion and contraction of memory.
However there is no apparent difference between the first time and
other times (possibly because memory has contracted to its initial
state by the end).
Elisp:
interpreted: 28.5 (E-box time, as used by RPG, 20.1 sec.)
R/UCI Lisp (with the same functions interpreted):
interpreted: 32.6
So Elisp is (as usual) a small amount faster than R/UCI Lisp. This
suggests that a good prediction for the final version of Elisp is 14
sec. interpreted. I am not ready to make predictions for Elisp compiled
code, as we don't know how the pager refill problem is going to affect
it. My guess is that it will be slightly slower than R/UCI Lisp, with
slowdown due to pager refills (from extended addressing) somewhat offset
by the better code generated by Utah's compiler.
Note that I normally report "normal" CPU time, not E-box times as used
by RPG. The E-box times will be noticably smaller in the case of Elisp.
I regard the use of E-box time with Elisp as problematical, since it
is significantly smaller than conventional CPU time, even with 0 load
on the system. I think this shows that E-box time omits some sort of
overhead that Elisp generates, probably pager refills (though the
documentation says that refills are not counted). Until someone convinces
me otherwise, I will regard conventional CPU time as a better index of
Elisp's load on the system. I report CPU times with fairly light (1 to 2)
load averages.
-------
∂06-Apr-81 2007 RPG
To: lisptranslators at SU-AI
Here's the real timing stuff. As I pointed out, the old RUNTIME
(which is what RUNTIME in MacLisp here gives) is EBOX time (excluding
all memory time). Also, COMPILE the functions. The initial run
on SAIL does many CORE UUOs, which are some page creation stuff on ITS,
so it may run very slowly. The total runtime here at SAIL is given
by adding the GCTIME and WTIME entries below.
This program is henceforth called: ``SAIL constraint combinatorial pairing
program'' or SCCPP.
-rpg-
RUNTIME = EBOX time
WTIME = EBOX + memory time (approx.)
2592 ;number of pairings
(RUNTIME 1.969) ;EBOX time in seconds
(GCTIME 29.914) ;GCTIME in seconds
(WTIME 25.8693333) ;EBOX + MEMORY time in seconds
2592
(RUNTIME 1.903)
(GCTIME 2.616)
(WTIME 5.334)
2592
(RUNTIME 2.008)
(GCTIME 2.61)
(WTIME 5.59000003)
2592
(RUNTIME 1.959)
(GCTIME 2.065)
(WTIME 5.86833334)
2592
(RUNTIME 1.904)
(GCTIME 1.921)
(WTIME 5.1623333)
∂07-Apr-81 0924 RPG Rules
To: lisptiming at SU-AI
I have sent out the first benchmark, and already there are a number
of issues that need to be faced. First is that some systems (SAIL,
for instance) only reliably report EBOX time (excluding memory
time). Fortunately SAIL does make available some form of EBOX + MBOX
time, though it is unreproducible. When possible I want to see the most
information you can give me with as many distinctions as possible. If your
system can give a breakdown of memory references, cache write-through time,
page fault time, EBOX time,... please give me that. When I send out the
benchmarks I include the SAIL times so that you can get some idea of how
long it all takes. From now on I will provide EBOX time, EBOX + MBOX time,
and GCTIME. Because I only provide that does not mean that is all I want to
see.
Slightly more importantly is the issue of `cheating'. If the sources of
benchmarks wish to allow specializations of their programs to the test data,
they should make remarks to that effect. If someone cares to make such
specializations they must be cleared by the author and me. This isn't because
I like to be in control so much as I want to understand what is being gained
by the specialization and what features of the target LISP make such
specializations necessary and/or desirable.
For example, in the first benchmark several of the functions are implicit
LEXPRs, which in MacLisp means that there are more than 5 arguments. This
means that the arguments are passed on the stack rather than through registers.
Since this takes longer than the register convention (in this case) I want that
feature timed. In the test data I sent out, some of the arguments are provably
constantly (). Chuck Hedrick at Rutgers (cleverly) noticed this and specialized
the functions. I want to specifically disallow that specialization (since the
LISP he had allows LEXPRs). [So do it again, Chuck.]
-rpg-
∂07-Apr-81 1323 JONL at MIT-MC (Jon L White) Proposed ''mini'' benchmark, with interpretation.
Date: 7 APR 1981 1611-EST
From: JONL at MIT-MC (Jon L White)
Subject: Proposed "mini" benchmark, with interpretation.
To: lisptiming at SU-AI
It hardly seems appropriate to run timing tests without including a word
or two about the discussion last fall which generated (in Masinter's words)
so much more "heat" rather than "light", namely the TAK function sent my way
in September 1980 by Mr. Shigeki Goto of the Electical Communication
Laboratories, Nippon Telegraph and Telephone Co., in Tokyo.
(DEFUN TAK (X Y Z)
(COND ((GREATERP X Y)
(TAK (TAK (SUB1 X) Y Z)
(TAK (SUB1 Y) Z X)
(TAK (SUB1 Z) X Y) ))
(T Y) ))
The test case, named TARAI-4, is to measure the timing of (TAK 4 2 0)
The value of this trivial function can be seen, not in a competition
between lisps for "speed", nor in a condemnation of one dialect for
the "kludges" which must be performed in order to get such a trivial
thing to run reasonably fast, but rather in the analysis of the basic
issues which trying to time it brought out. After receiving many responses
from around the community, I mailed out a note in which was discussed
what I thought were some fundamental issues, and I'd like to send that
note to this group for consideration. The original note from Mr. Goto and
a lengthy series of communications about the timings for his test case,
especially from people in the Interlisp community, is in the file
JONL;GOTO NOTE
on the MIT-MC machine.
Date: 22 October 1980 11:08-EDT
From: Jon L White <JONL at MIT-MC>
Subject: Response to Goto's lisp timings
To: . . .
As Larry Masinter mentioned in his comment on the Goto
timings, comparisons between LISPs are likely to generate
more heat than light; but the replies did throw a little
more light on some things, especially the runtime variabilities
of an Interlisp program, and I thought I'd summarize them
and pass them along to the original recipients of the note.
However, I'd like to say that the general concern with speed
which I've encounterd in the past has been between MacLISP and
FORTRAN, rather than with some other lisp; and several Japanese
research labs have done AI research still in FORTRAN.
Just in case you're put off by looking at even more meaningless
statistics, I'd also like to aprise you that following the little
summary is a brief technical discussion of three relevant points
disclosed by the TAK function (out of the many possible points at
which to look). These technical points may be new to some of you,
and even beyond the LISP question you may find them useful; the key
words are (1) UUOLINKS, (2) Uniform FIXNUM representation, and
(3) Automatic induction of helpful numeric declarations by a compiler.
Almost everyone familiar with Interlisp recognized that
the ECL people had not requested "block" compilation in the TARAI-4
example, and several persons supplied results from various
20/60's around:
default compilation rewritten code, with
correspondent timings block-compiled timing
Date: 19 OCT 1980 2127-PDT 9.8ms 1.8ms
From: MASINTER at PARC-MAXC2
Date: 20 Oct 1980 1039-PDT 16.ms 2.ms
From: CSD.DEA at SU-SCORE (Doug Appelt)
Date: 20 Oct 1980 at 2257-CDT 0.83ms (for UCILISP only)
From: tyson at UTEXAS-11
<Goto's original timings on ICILISP> 2.9ms
<Goto's original timings on Interlisp> 15.0ms
<myself, for MacLISP on 20/50) 0.556ms
There seems to be some unexplained discrepancy between Tyson's timing
and that of Goto, as well as between Masinter's and Appelt's default-
compilation timings; but the "best-possible" Interlisp timings for
a re-written function (replacing GREATERP by IGREATERP) and using
the "right" block declarations seem consistent at around 2ms. Indeed,
as Shostack suggest in his note of "20 Oct 1980 1036-PDT" there is
quite a bit of variablity in timing Interlisp functions depending on
just the right set of declarations etc (even for such a simple function).
A point which, however, seems to be missed is that the notion of
"block" compilation requires a decision at compile-time as to what
kind of function-linkage would be desirable (I presume that spaghetti-
stack maintainence is the worst offender in runtime slowdown here);
by comparison, the decision between fast and slow function linkage
in MacLISP is made dynamically at runtime, so that only one kind of
compilation be needed. Indeed, by not burdening the novice with the
understanding of yet one more inscrutable compilation question
("block" versus what?), the novice needn't be unduly penalized for
not becoming a "hacker"; the above timings show a penalty of a factor
between 5 and 10 for ignoring, or under-utilizing, the "block" question.
(1) UUOLINKS:
The following strategy, which we call the UUOLINKS hack, may have
first been introduced into the old LISP 1.6:
Arguments are set up for passing to a function and an instruction
in a specially-managed hash table is XCT'd.
In case a fast link is acceptable, the first usage of this linking
will convert the hash entry to a PUSHJ P,... -- if not
acceptable, it will remain a slow interpretive route.
Two copies of the hash-table are kept -- one is never altered by
the linker, so that at any given point in time, all the "fast"
links may be restored to the unconverted slow interpretive route
(which may yet again be "snapped" to fast).
Typically, a hash table size of 512. is satisfactory, but some
applications require 1024. or more (in particular, MACSYMA).
Indeed as Boyer (@SRI-KL) mentioned in his note of "21 Oct 1980 2055-PDT",
the fast route -- whether by Interlisp's block compiler, or by MacLISP's
runtime "snapper" -- does not leave much debugging help lying around
on the stack; at least with this UUOLINKS approach, one can make the
decision while in the middle of a debugging session, without penalty.
The time cost of using the slow linkage seems to be a factor of between
2 and 5.
(2) Uniform FIXNUM representation
Many years ago we changed MacLISP's representation of FIXNUM so
that it would be uniform; unlike the other PDP10 lisps with which I
am familiar, we do not code some fixnums (small ones) as "immediate"
pointers and others (larger ones) as addresses. Also, there is a
read-only page or two which "caches" fixnum values of about -300. to
+600., so that number consing of small numbers won't actually be
allocating new cells; e.g. interpreting a form like
(DO I 0 (ADD1 I) (GREATERP I 100.) ...)
Although I took a lot of flak for flushing the INUM scheme in favor
of the uniform scheme, consider the advantage for compilation strategy,
as seen in these representative code sequences for (IGREATERP X Y):
INUM scheme: MOVE A,-3(P)
JSP T,UNBOX
SAVE TT,somewhere
MOVE A,-4(P)
JSP T,UNBOX
CAME TT,somewhere
...
Uniform scheme: MOVE TT,@-3(P)
CAME TT,@-4(P)
...
(3) Automatic induction of helpful numeric declarations by a compiler.
As Masinter and Boyer pointed out, most Interlisp programmers
would probably be using "IGREATERP" rather than "GREATERP" (the MacLISP
correspondent is "<" ). But a compiler can accumulate static information
and do this change automatically; at the very least, it could give
out warning checks such as "Floating-point argument used with FIXNUM-only
operation". Providing the capability for compile-time typing of variables
is probably the only way to meet the FORTRAN challenge -- which must be
met since much useful AI research needs both symbolic and numeric
capabilities. Larry's MASTERSCOPE is a very similar sort of automated
induction scheme.
∂10-Apr-81 1051 HEDRICK at RUTGERS Re: Rules
Date: 10 Apr 1981 1301-EST
From: HEDRICK at RUTGERS
Subject: Re: Rules
To: RPG at SU-AI
cc: lisptiming at SU-AI
In-Reply-To: Your message of 7-Apr-81 1224-EST
OK, but you will notice that I was also the only person who got the
thing done by the deadline you specified. If we are going to end up
doing major conversions for each test, and furthermore if conversions
are going to have to be approved by you, you may find fewer volunteers
than originally planned. The reason for eliminating the extra args was
of course that turning the things into LEXPR's would be a pain in the
neck. This is because in UCI Lisp LEXPR's do not refer to arguments by
name, but as (ARG x). I can obviously write a program to do this, but
that was not feasible in the amount of time I had before the meeting.
Furthermore, it looked to me like the functions that had more than 5
arguments were used for preparing the data, but that only PAIRS1
and PAIRS2 were actually called large numbers of times. Now that the
issue has been brought up, I will of course test LEXPR's, but would
be surprised if there is any change in performance.
Even if LEXPR's change the performance, I am not sure that is the right
way to do the conversion to UCI Lisp. It would be very unusual for a UCI
Lisp programmer to use an LEXPR in order to handle more than 5
arguments. They are normally used for indefinite arguments, when it
makes sense to number them. If named variables are replaced with (ARG 1),
(ARG 2), ..., this obviously makes the program somewhat opaque. Another
possible method is to lambda-bind variables to the required values and
refer to them globally. While this is less than ideal, I claim that it
is better than (ARG n). Making a list of the extra arguments is also
possible, but (CADR ARGS) is little better than (ARG 2).
At this point we start having to ask what the purpose of this project
is. If it is to see how the dialects vary, then I claim that nothing is
accomplished by forcing us to convert into code that we would not in
fact write that way in the dialect. It seems to me that it is perfectly
legitimate for me to say that UCI Lisp simply does not support EXPR's
with more than 5 arguments, and that I would find some other way to do
my task.
-------
Groundrules (reprise)
I believe that at the outset of this project I stated what my goals
were, and the order of importance. But I will reiterate them anyway:
1. I want to provide for each major type operation (variable lookup,
function call,...) a relative, hopefully total, order on the various LISPs
and LISP systems around. I also hope that there is enough standardized
timing facilities around to at least get some idea of the approximate
absolute speeds as well.
2. I want to determine, myself, what the qualitative differences between
the various LISP systems around are. I hope to do this by watching how various
programs and constructs are handled by the translators. At first I hoped
that the ``translator volunteers'' would be just that, but now it seems I
will need to do most of the translations myself, which is ok as long as
I can merely provide the framework and not exact working code. If you
want a NIL/MacLisp person to propose the exact program whose timing is
universally reported as the performance of your favorite LISP system, then
I might be more willing to do everything myself.
3. Having ``rules'' is absolutely fair. First, one certainly cannot look
at specializations of a program to the data. Moreover, innate laziness (no
`major conversions' to quote Hedrick) dictates that the programs should be
examined as little as possible. Arguing style is totally irrelevant.
Suppose I wanted to test function call time and proposed factorial in its
recursive form, it is totally opposed to the spirit of what that tests to
translate it into an iterative program no matter what absolute style
considerations you bring to bear. One of the things I wanted to test
with this program is how functions with more than 5 arguments behave
and are handled with different systems. This is totally fair.
As pointed out, the standard > 5 argument LEXPR conversion is
(defun foo (a1 ... an) ...) =>
(defun foo n ((lambda (a1 ... an) ...) (arg 0) ... (arg n)))
I was flip with Chuck because we spent 2 delightful years at Illinois
together a few years back.
4. Perhaps I should have sent out more help with this program, and
in the future I will, but another point of this benchmark was to test
the testing system.
From now on I will provide with each benchmark a description of each
`primitive' in the program(s) that is not in McCarthy along with translation
tips for those facilities that are not universal. As time goes on and I
become truly familiar with all the systems, I will provide specific help
for each LISP.
-rpg-
∂10-Apr-81 1205 George J. Carrette <GJC at MIT-MC> Rules
Date: 10 April 1981 14:19-EST
From: George J. Carrette <GJC at MIT-MC>
Subject: Rules
To: HEDRICK at RUTGERS
cc: lisptiming at SU-AI, RPG at SU-AI
I too was suprised at the chastising about breaking rules that
went on here considering its relevance that classic law of programming,
"if a function has more than three arguments then they are
probably in the wrong order."
In point of fact, all the common so-called "lexprs," PROGN,
TIMES, PLUS, LIST, are specially handled by the compilers
of the lisp system's I'm familiar with.
Furthermore, the maclisp and lispm programs that have
used user-defined multi-argument constructions have invariably
developed in the direction of passing arguments by "keywords"
where these keyword are pre-processed in some form or another
at compile-time.
Ah, there are some interesting possible ways of optimizing
keyword argument calling in VAX NIL. Maybe we can talk about
things like this at some time.
-gjc
∂11-Apr-81 1001 CSVAX.jkf at Berkeley result of pairs benchmark on franz.
Date: 11 Apr 1981 09:56:26-PST
From: CSVAX.jkf at Berkeley
To: rpg@su-ai
Subject: result of pairs benchmark on franz.
pair benchmark results
submitted by j foderaro
(csvax.jkf@berkeley)
10 april 81
Here are the results or running the pairs benchmark on Franz Lisp on
a VAX 11/780 runing Berkeley 4BSD Unix. The load average was less
than one when the timing was done. Timing on Unix is done in 60ths of
a second and the time charged to a process includes some of the system
overhead for memory management. I ran the benchmarks on an unloaded
system to reduce the interference of the memory manager.
The program was run with modification only to the test function
shown below. Perhaps you should in the future use macros like (cpu-time)
and (gc-time) and each site can define these macros.
(defun test ()
((lambda (t1 x gt)
(setq x (pairs a b () 'equal () () ()))
(setq t1 (- #-Franz (runtime)
#+Franz (car (ptime))
t1))
(setq gt (- #-Franz (status gctime)
#+Franz (cadr (ptime))
gt))
(print (length x))
(print (list 'runtime
(QUOTIENT (FLOAT (- t1 gt))
#-Franz 1000000.
#+Franz 60.)))
(print (list 'gctime
(quotient (float gt)
#-Franz 1000000.
#+Franz 60.)))
#+Franz (terpri))
#-Franz (runtime) #+Franz (car (ptime))
()
#-Franz (status gctime)
#+Franz (cadr (ptime))))
---
The size of the compiled file is 2768 bytes.
Here are the results::
Script started on Fri Apr 10 22:16:58 1981
Reval: lisp
Franz Lisp, Opus 34
-> (load 'pairs)
[fasl pairs.o]
t
-> (test)
2592(runtime 7.033333333333333)(gctime 23.53333333333333)
nil
-> (test)
2592(runtime 7.383333333333333)(gctime 4.816666666666667)
nil
-> (test)
2592(runtime 7.283333333333333)(gctime 4.366666666666667)
nil
-> (test)
2592(runtime 7.333333333333333)(gctime 4.666666666666667)
nil
-> (exit)
------
I looked at which functions were being called and it seems just about all this
benchmark does is call 'member' 10,000 times. I noticed that in our system
'memq' would do as good a job as 'member' so I replaced member by memq
and ran it with these results:
Reval: lisp
Franz Lisp, Opus 34
-> (load 'memqpairs)
[fasl memqpairs.o]
t
-> (test)
2592(runtime 1.683333333333333)(gctime 23.55)
nil
-> (test)
2592(runtime 1.733333333333333)(gctime 4.833333333333333)
nil
-> (test)
2592(runtime 1.766666666666667)(gctime 4.35)
nil
-> (test)
2592(runtime 1.783333333333333)(gctime 4.7)
nil
-> (exit)
script done on Fri Apr 10 22:21:50 1981
∂13-Apr-81 1320 RPG
To: lisptranslators at SU-AI
First, in SCCPP there are functions with 7 arguments. For example,
the first function starts out:
(DEFUN PAIRS
(X Y MUST-APPEAR FUN APPLY-CONSTRAINTS CONSTRAINTS
NIL-PAIRS) ...)
I suggest the following translation:
(DEFUN PAIRS n
((LAMBDA (X Y MUST-APPEAR FUN APPLY-CONSTRAINTS CONSTRAINTS
NIL-PAIRS) ...)
(ARG 1)(ARG 2)(ARG 3)(ARG 4)(ARG 5)(ARG 6)(ARG 7)))
(*list a1 ... an) => (cons a1 (cons a2 ...(cons an-1 an)))
(*catch x y) evaluates the form y. x should EVAL to a tag. If y returns
normally, the value of the *catch is the value of y. If the evaluation
of y entails the evaluation of a form like (*throw q v) where q EVALs
to the same tag that x did, then v is evaluated and the value of the *catch
is the value of v. Unless, there is an intervening *catch with the same
tag...
MAPCAN is MAPCAR with NCONC instead of CONS.
1+, +, < etc are FIXNUM versions of ADD1, PLUS, LESSP etc.
(FUNCALL fun x1 ... xn) evaluates all of its arguments and
applies the value of fun to the arguments x1 ... xn. So
(FOO a b c d) = (FUNCALL 'FOO a b c d)
-rpg-
∂13-Apr-81 1239 RPG Groundrules (reprise)
To: lisptiming at SU-AI
I believe that at the outset of this project I stated what my goals
were, and the order of importance. But I will reiterate them anyway:
1. I want to provide for each major type operation (variable lookup,
function call,...) a relative, hopefully total, order on the various LISPs
and LISP systems around. I also hope that there is enough standardized
timing facilities around to at least get some idea of the approximate
absolute speeds as well.
2. I want to determine, myself, what the qualitative differences between
the various LISP systems around are. I hope to do this by watching how various
programs and constructs are handled by the translators. At first I hoped
that the ``translator volunteers'' would be just that, but now it seems I
will need to do most of the translations myself, which is ok as long as
I can merely provide the framework and not exact working code. If you
want a NIL/MacLisp person to propose the exact program whose timing is
universally reported as the performance of your favorite LISP system, then
I might be more willing to do everything myself.
3. Having ``rules'' is absolutely fair. First, one certainly cannot look
at specializations of a program to the data. Moreover, innate laziness (no
`major conversions' to quote Hedrick) dictates that the programs should be
examined as little as possible. Arguing style is totally irrelevant.
Suppose I wanted to test function call time and proposed factorial in its
recursive form, it is totally opposed to the spirit of what that tests to
translate it into an iterative program no matter what absolute style
considerations you bring to bear. One of the things I wanted to test
with this program is how functions with more than 5 arguments behave
and are handled with different systems. This is totally fair.
As pointed out, the standard > 5 argument LEXPR conversion is
(defun foo (a1 ... an) ...) =>
(defun foo n ((lambda (a1 ... an) ...) (arg 0) ... (arg n)))
I was flip with Chuck because we spent 2 delightful years at Illinois
together a few years back.
4. Perhaps I should have sent out more help with this program, and
in the future I will, but another point of this benchmark was to test
the testing system.
From now on I will provide with each benchmark a description of each
`primitive' in the program(s) that is not in McCarthy along with translation
tips for those facilities that are not universal. As time goes on and I
become truly familiar with all the systems, I will provide specific help
for each LISP.
-rpg-
∂13-Apr-81 1338 CLR at MIT-XX Re: Groundrules (reprise)
Date: 13 Apr 1981 1634-EST
From: CLR at MIT-XX
Subject: Re: Groundrules (reprise)
To: RPG at SU-AI
cc: pdl at MIT-XX
In-Reply-To: Your message of 13-Apr-81 1539-EST
Dear rpg,
I would like to if possible participate in some of the LISP timing
tests using MDL on the 20. Unfortunately, MDL is similar to LISP (especially
in spirit) but vastly different in detail. In order to (for instance) run
your first proposed benchmark, a gross translation will be required. As
starting points, MDL has no LAMBDA, PROGN, LIST*,MAPC, MAPCAN... All of
these things can be accomplished in MDL but in a vastly different way.
My question is whether I should participate in the timings under
these circumstances or should MDL drop out due to extreme differences.
-Chris Reeve
-------
I would like to see what MDL has to say about these issues. I don't object
to having languages that are not recognizably LISP as long as they are
appropriate languages for AI research. ``Appropriate'', I think, means
at least being programming environment based as opposed to the sort
of batch based environment that PASCAL-like languages encourage. In any event
at the minimum send me your conception of the first benchmark.
∂13-Apr-81 1724 YONKE at BBND Re: Groundrules (reprise)
Date: 13 Apr 1981 2022-EST
Sender: YONKE at BBND
Subject: Re: Groundrules (reprise)
From: YONKE at BBND
To: RPG at SU-AI
Message-ID: <[BBND]13-Apr-81 20:22:10.YONKE>
In-Reply-To: Your message of 13 Apr 1981 1239-PST
Dick, I agree with your summary (or reiteration) of your last
message. (I can always write a program that makes my lisp look
good and under the right conditions make the others look like
shit, e.g. DREVERSE on Interlisp-Jericho is faster than a speeding
banana, but other things may be slow.)
Sorry we didn't get a chance to talk at the lisp meeting -- maybe
next time. I'm going to be out of communication for the rest
of this month (sailing in the Virgin Islands). So apologises
for the lack of messages.
Bye the way, are the timings "official" in the sense of being
sponsored by an agency or is this your "pet project"?
Martin
The project is currently a siphoning from other Stanford money,
but McCarthy wants to get some machine time and a grad student
to do some of the correlation.
-rpg-
∂13-Apr-81 1934 Mabry Tyson <ATP.Tyson at UTEXAS-20> Re: Groundrules (reprise)
Date: 13 Apr 1981 2134-CST
From: Mabry Tyson <ATP.Tyson at UTEXAS-20>
Subject: Re: Groundrules (reprise)
To: RPG at SU-AI
In-Reply-To: Your message of 13-Apr-81 1439-CST
Your "standard > 5 argument LEXPR conversion" is not correct in UCI-LISP
and, presumably, not in Hedrick's Lisp. The compiler does not handle the
lambda with > 5 args whether it is a defined function or an internal
lambda.
Now I ask, where does your word "standard" come from?
Again, I'd like to point out that Hedrick's original program should be
ok. He pointed out that he could not handle > 5 args and handled it in
a way that would not affect the timing in any significant way (I'd say
less than .1%).
By the way, I checked the LISP OARCHI file and found that the >5 args was
handled beginning in November 1972.
(While I was checking on that, I got your next message. You still are thinking
that a compiler would have no trouble with 5 args to a Lambda even if it
can't handle 5 args to the Lambda of the function definition. The answer, of
course, is to use nested LAMBDAs or a PROG and SETQs. From the original
entry of 11/72 into LISP OARCHI it looks like MACLISP does the same thing when
it finds an internal LAMBDA with >5 args as it does with a function of >5 args.)
-------
Register/Stack Allocation of LAMBDA vars
It all depends on your compiler or at least on the level of technology
embraced thereby. The MacLisp compiler (and, I think, the InterLisp compiler)
both take internal LAMBDAs to mean a naming (or binding) of temporary
locations, normally on the stack but possibly in the registers. Modern
hardware (cache memories) blurs the necessity of register desirability
for speed of access.
Also, register passing meant one didn't need to pass the number
of arguments as in the LEXPR case, where a stack passing protocol is
used, and where the adjustment of the stack is explicitly required.
Thus, there is a distinction between function interface LAMBDAs and
internal LAMBDAs in some compilers. Since there can be n active LAMBDA
variables at any one time, the need for stack allocation (binding)
is necessary in any compiler. The stack allocation, though, can be
done as a register save operation rather than as a pre-planned allocation,
so I guess you could have a reasonable compiler which register allocates
though I wouldn't have thought it was still done that way.
So, translate the > 5 case as best you can and tell me how you decided on it.
-rpg-
∂13-Apr-81 2214 HEDRICK at RUTGERS Re: Groundrules (reprise)
Date: 14 Apr 1981 0111-EST
From: HEDRICK at RUTGERS
Subject: Re: Groundrules (reprise)
To: RPG at SU-AI
In-Reply-To: Your message of 13-Apr-81 1539-EST
The problem with your proposed paraphrase of expr's with > 5 args is
that it uses the construct that we are trying to avoid, namely a
lambda with > 5 args. I am sure I can come up with something...
It seems that for your project to work, we are going to have to send
back the translation. Else how can you judge all of what you want to
judge? What I will probably do is build up a MACLisp conversion package
(assuming that many of the tests are in MACLisp - if you contemplate
doing each one in a different dialect things could get tense). Any
preferences as to the form in which I send the translation? At this
point I can just send you the MACLisp package. But as time goes on that
will get longer and longer and have less and less specific relevance to
any one test. I do not contemplate rewriting the function in UCI Lisp,
but mostly defining the functions and then using the test in close to
its original form. Possibly you will say that as long as I can implement
the constructs in the original, you don't really care to see how I do
it. Is that the case?
-------
Misunderstanding
I guess what I said to Tyson (enclosed) is relevant. I was under the impression
that internal LAMBDAs could compile onto the stack directly, rather than
through a register-save operation. So my comments about the LEXPR conversion
simply did not apply to your system. But, I've learned something important
about your LISP, which is what I wanted to do.
From now on I hope to specify what it is that is tested with each benchmark
and be able to trust that you're doing the right thing, though I would like
to see the resulting code for the benchmark and/or the translation program.
What I may end up doing is to send out both the original benchmark
and my Maclisp translation to you in order to make things easier.
About LIST* (which I mistakenly called *LIST through a weird spoonerism)
I think we all ought to get straight which LISPs do macros, and when they
are to be used. For example, I think that LIST* is turned into the
CONS form and then compiled, so I recommend a macro version of it.
Attached message to Tyson:
Subject: Register/Stack Allocation of LAMBDA vars
It all depends on your compiler or at least on the level of technology
embraced thereby. The MacLisp compiler (and, I think, the InterLisp compiler)
both take internal LAMBDAs to mean a naming (or binding) of temporary
locations, normally on the stack but possibly in the registers. Modern
hardware (cache memories) blurs the necessity of register desirability
for speed of access.
Also, register passing meant one didn't need to pass the number
of arguments as in the LEXPR case, where a stack passing protocol is
used, and where the adjustment of the stack is explicitly required.
Thus, there is a distinction between function interface LAMBDAs and
internal LAMBDAs in some compilers. Since there can be n active LAMBDA
variables at any one time, the need for stack allocation (binding)
is necessary in any compiler. The stack allocation, though, can be
done as a register save operation rather than as a pre-planned allocation,
so I guess you could have a reasonable compiler which register allocates
though I wouldn't have thought it was still done that way.
So, translate the > 5 case as best you can and tell me how you decided on it.
-rpg-
∂21-Apr-81 1316 RPG SCCPP
To: lisptranslators at SU-AI
I have only heard from SAIL, Multics, Franz, and Rutgers on the
first timing benchmark so far. Please send your results. To see
what people have done so far you can look at:
SAIL:RESULTS.TIM[TIM,LSP]
No password to FTP away or to TYPE it out.
-rpg-
∂13-Mar-81 1959 MEEHAN at MIT-AI (James R. Meehan)
Date: 13 MAR 1981 2132-EST
From: MEEHAN at MIT-AI (James R. Meehan)
To: RPG at SU-AI
I was "volunteered" into the LISP Timing Mailing List, but I'd like
to get off it if it requires reading the volumes of mail I've seen in
the last few days.
I'm in charge of UCI LISP and UCI MLISP (University of California at
Irvine) and I have more than a passing interest in LISP-related projects,
but my acount at MIT-AI is used perhaps once a week for checking mail
and messages, and [important] I do this at 300 baud. If you can send
some of the correspondence by US mail (as opposed to all the day-to-day
stuff), I'd be interested.
I should also put in a pitch for mentioning your project in the
SIGART Newsletter, which is read by about as large a LISP audience
as anything.
Cordially - Jim Meehan
∂31-Mar-81 1615 Deutsch at PARC-MAXC Re: Timing Benchmarks
Date: 31 Mar 1981 16:14 PST
From: Deutsch at PARC-MAXC
Subject: Re: Timing Benchmarks
In-reply-to: RPG's message of 31 Mar 1981 1451-PST
To: Dick Gabriel <RPG at SU-AI>
It is vitally important that timing tests NOT be limited to made-up code
fragments, but include systems which are in heavy use NOW. We got burned
very badly on Interlisp-D because of completely erroneous ideas about what
things actually got used a lot.
Right, but I'm having trouble getting people to contribute benchmarks!
-rpg-
∂21-Apr-81 1604 Greenberg.Symbolics at MIT-Multics
Date: 21 April 1981 19:04 est
From: Greenberg.Symbolics at MIT-Multics
To: Dick Gabriel <RPG at SU-AI>
In-Reply-To: Message of 21 April 1981 15:58 est from Dick Gabriel
Well, since I sent you these results, I have done some more experimentation.
The MIT-AI results can be written off as user load. Yes,
indeed, of course those files were compiled. I am afraid that
I will have to stand by those numbers and conclude that consing
is DAMN SLOW. The -10 can allocate a cons in 1 XCT; a routine of
some length is involved on Multics. Oh well. That's why I
work with Lisp Machines now.
∂07-Apr-81 1037 Mabry Tyson <ATP.Tyson at UTEXAS-20> Re: Rules
Date: 7 Apr 1981 1230-CST
From: Mabry Tyson <ATP.Tyson at UTEXAS-20>
Subject: Re: Rules
To: RPG at SU-AI
cc: hedrick at RUTGERS
Not being totally familiar with MACLISP, I didn't realize that MACLISP
automatically made LEXPRs out of EXPRs with 6 or more arguments. UCI-Lisp
(which is presumably close to what Hedrick is running) does have LEXPRs
but does not provide for automatic conversion.
What I did, and I think it is valid, was to make the last three args into
a list. Any argument with that technique? I don't separate the list
except where I need it.
It appears to me that the major portion of the time is spent in PAIRS1
rather than in the sections of code that involve the >5-argument functions.
The difference in argument passing for them should be swamped by the
recursion in PAIRS1. (I just ran a test and 97% of the time is spent in
PAIRS1 (interpreted).)
-------
∂07-Apr-81 1107 Mabry Tyson <ATP.Tyson at UTEXAS-20> Rules - GC time
Date: 7 Apr 1981 1259-CST
From: Mabry Tyson <ATP.Tyson at UTEXAS-20>
Subject: Rules - GC time
To: rpg at SU-AI
The first times that I ran SCCPP, I arbitrarily chose to use approximately
30000 (decimal) free space. The ratio of runtime versus GC time was
approximately the same as what you had supplied. However I later ran it
with twice that space. I was now getting exactly one GC per test (each
recovering approximately the same amount of space). My total GC time
had dropped a factor of 3 1/2.
UCI-Lisp uses the standard mark and sweep routine. Obviously there is
an overhead associated with each GC. Furthermore, a GC during which
most of the core is tied up is more costly than one in which free space
is almost empty. Thus GC time required for a problem is a hard point
to pin down.
If I were to set my free space up so that I totally filled memory, I
would have less than one GC per run on the average. If I used more free
space than physical core would allow (not possible on our 20 but a problem
on our 10), I would swap GC time for paging time. This would seem to be
unfair as paging time could be considered either the jobs cost or system
overhead (like swapping). On our 10, increasing core size to beyond
the physical space dramatically increases run time because of paging costs.
It might be a reasonable idea to specify a maximum amount of free space
(or should it be total core used?) in which a program can be run. This
may not be possible for the Lisp machines. An alternative idea would be
to adjust core size so that you get exactly one GC per test. Suppose that
you start off with a fresh free space and run the problem, GCing only when
it was done. This would count the cost to collect the words used once
without counting what it would cost to track through the temporary data
during the running of the program (which is dependent on when the GC
happens). I feel this would be a reasonable comparison to the costs
associated with having a parallel GC or a machine with such a large
address space so as to never have a GC.
-------
∂07-Apr-81 2213 Mabry Tyson <ATP.Tyson at UTEXAS-20> SCCPP on UCI-Lisp
Date: 8 Apr 1981 0001-CST
From: Mabry Tyson <ATP.Tyson at UTEXAS-20>
Subject: SCCPP on UCI-Lisp
To: rpg at SU-AI
Results of LISP timing tests for UCI-Lisp
(Times are in the form R+G where R is the runtime (not including GC time)
and G is the GC time. All times are in seconds. "Interp" means interpreted,
"Slow" means compiled but using UUO-links, "Fast" means compiled with the UUO
links replaced by direct jumps.)
Processor
Program KL-2060 KI-1060
Interp Slow Fast Interp Slow Fast
SCCPP:
Free:
30000 14.00+2.78 5.32+2.38 3.38+2.78 53.43+8.58 21.14+11.62 12.77+11.56
14.04+2.83 5.37+2.70 3.35+2.71 20.40+11.47 12.63+11.36
3.34+2.70 20.72+11.50 12.71+11.44
60000 14.60+0.58 5.40+0.50 3.35+0.53 52.80+1.42 21.18+1.45 12.81+1.39
14.20+0.64 5.44+0.52 3.36+0.53 21.27+1.38 12.34+1.43
14.09+0.63 5.37+0.52 3.35+0.52 21.19+1.40 12.93+1.40
14.22+0.61 5.35+0.52 3.40+0.53
Notes: The functions with more than 5 arguments were changed to 5 argument
functions by making the last 3 into a list. These were involved in less than
3% of the run time so the difference is insignificant. The timings on the
2060 were with a load average less that 1. The timings on the KI-10 were with
a moderate load. The differences in the various timing runs are probably due
to system overhead due to swapping. The 30K free space examples had about 5
or 6 GC's while the 60K free space examples had one GC each.
-------
∂21-Apr-81 2018 Mabry Tyson <ATP.Tyson at UTEXAS-20> Lost mail⊗?
Date: 21 Apr 1981 2217-CST
From: Mabry Tyson <ATP.Tyson at UTEXAS-20>
Subject: Lost mail⊗?
To: rpg at SU-AI
Enclosed is a set of all my messages to you. Apparently some of them (in
particular the results I sent you just before the Lisp meeting) got lost.
I checked TIMING.MSG[TIM,LSP] and only found two msgs from me in there.
I also saw that one of them apparently had been replied to - but I never got
a reply. I don't know what is going on, but please acknowledge receipt of
this.
6-Apr-81 16:05:21-CST,582;000000000001
Date: 6 Apr 1981 1605-CST
From: Mabry Tyson <ATP.Tyson at UTEXAS-20>
Subject: Re: Timing benchmark
To: RPG at SU-AI
In-Reply-To: Your message of 6-Apr-81 1502-CST
I suggest that each program submitted for everyone to run get a unique
name so we can describe it simply. Also, please name the language
in which it was written.
Also, it wasn't clear from your message whether the code got compiled or
ran interpreted for the times you got. (Only from looking at the code,
I'd guess it ran interpreted since there was nothing that seemed to compile
it.)
-------
7-Apr-81 12:30:27-CST,911;000000000001
Date: 7 Apr 1981 1230-CST
From: Mabry Tyson <ATP.Tyson at UTEXAS-20>
Subject: Re: Rules
To: RPG at SU-AI
cc: hedrick at RUTGERS
Not being totally familiar with MACLISP, I didn't realize that MACLISP
automatically made LEXPRs out of EXPRs with 6 or more arguments. UCI-Lisp
(which is presumably close to what Hedrick is running) does have LEXPRs
but does not provide for automatic conversion.
What I did, and I think it is valid, was to make the last three args into
a list. Any argument with that technique? I don't separate the list
except where I need it.
It appears to me that the major portion of the time is spent in PAIRS1
rather than in the sections of code that involve the >5-argument functions.
The difference in argument passing for them should be swamped by the
recursion in PAIRS1. (I just ran a test and 97% of the time is spent in
PAIRS1 (interpreted).)
-------
7-Apr-81 12:59:51-CST,2112;000000000001
Date: 7 Apr 1981 1259-CST
From: Mabry Tyson <ATP.Tyson at UTEXAS-20>
Subject: Rules - GC time
To: rpg at SU-AI
The first times that I ran SCCPP, I arbitrarily chose to use approximately
30000 (decimal) free space. The ratio of runtime versus GC time was
approximately the same as what you had supplied. However I later ran it
with twice that space. I was now getting exactly one GC per test (each
recovering approximately the same amount of space). My total GC time
had dropped a factor of 3 1/2.
UCI-Lisp uses the standard mark and sweep routine. Obviously there is
an overhead associated with each GC. Furthermore, a GC during which
most of the core is tied up is more costly than one in which free space
is almost empty. Thus GC time required for a problem is a hard point
to pin down.
If I were to set my free space up so that I totally filled memory, I
would have less than one GC per run on the average. If I used more free
space than physical core would allow (not possible on our 20 but a problem
on our 10), I would swap GC time for paging time. This would seem to be
unfair as paging time could be considered either the jobs cost or system
overhead (like swapping). On our 10, increasing core size to beyond
the physical space dramatically increases run time because of paging costs.
It might be a reasonable idea to specify a maximum amount of free space
(or should it be total core used?) in which a program can be run. This
may not be possible for the Lisp machines. An alternative idea would be
to adjust core size so that you get exactly one GC per test. Suppose that
you start off with a fresh free space and run the problem, GCing only when
it was done. This would count the cost to collect the words used once
without counting what it would cost to track through the temporary data
during the running of the program (which is dependent on when the GC
happens). I feel this would be a reasonable comparison to the costs
associated with having a parallel GC or a machine with such a large
address space so as to never have a GC.
-------
8-Apr-81 00:01:56-CST,1506;000000000001
Date: 8 Apr 1981 0001-CST
From: Mabry Tyson <ATP.Tyson at UTEXAS-20>
Subject: SCCPP on UCI-Lisp
To: rpg at SU-AI
Results of LISP timing tests for UCI-Lisp
(Times are in the form R+G where R is the runtime (not including GC time)
and G is the GC time. All times are in seconds. "Interp" means interpreted,
"Slow" means compiled but using UUO-links, "Fast" means compiled with the UUO
links replaced by direct jumps.)
Processor
Program KL-2060 KI-1060
Interp Slow Fast Interp Slow Fast
SCCPP:
Free:
30000 14.00+2.78 5.32+2.38 3.38+2.78 53.43+8.58 21.14+11.62 12.77+11.56
14.04+2.83 5.37+2.70 3.35+2.71 20.40+11.47 12.63+11.36
3.34+2.70 20.72+11.50 12.71+11.44
60000 14.60+0.58 5.40+0.50 3.35+0.53 52.80+1.42 21.18+1.45 12.81+1.39
14.20+0.64 5.44+0.52 3.36+0.53 21.27+1.38 12.34+1.43
14.09+0.63 5.37+0.52 3.35+0.52 21.19+1.40 12.93+1.40
14.22+0.61 5.35+0.52 3.40+0.53
Notes: The functions with more than 5 arguments were changed to 5 argument
functions by making the last 3 into a list. These were involved in less than
3% of the run time so the difference is insignificant. The timings on the
2060 were with a load average less that 1. The timings on the KI-10 were with
a moderate load. The differences in the various timing runs are probably due
to system overhead due to swapping. The 30K free space examples had about 5
or 6 GC's while the 60K free space examples had one GC each.
-------
13-Apr-81 21:34:35-CST,1298;000000000001
Date: 13 Apr 1981 2134-CST
From: Mabry Tyson <ATP.Tyson at UTEXAS-20>
Subject: Re: Groundrules (reprise)
To: RPG at SU-AI
In-Reply-To: Your message of 13-Apr-81 1439-CST
Your "standard > 5 argument LEXPR conversion" is not correct in UCI-LISP
and, presumably, not in Hedrick's Lisp. The compiler does not handle the
lambda with > 5 args whether it is a defined function or an internal
lambda.
Now I ask, where does your word "standard" come from?
Again, I'd like to point out that Hedrick's original program should be
ok. He pointed out that he could not handle > 5 args and handled it in
a way that would not affect the timing in any significant way (I'd say
less than .1%).
By the way, I checked the LISP OARCHI file and found that the >5 args was
handled beginning in November 1972.
(While I was checking on that, I got your next message. You still are thinking
that a compiler would have no trouble with 5 args to a Lambda even if it
can't handle 5 args to the Lambda of the function definition. The answer, of
course, is to use nested LAMBDAs or a PROG and SETQs. From the original
entry of 11/72 into LISP OARCHI it looks like MACLISP does the same thing when
it finds an internal LAMBDA with >5 args as it does with a function of >5 args.)
-------
13-Apr-81 21:46:53-CST,435;000000000001
Date: 13 Apr 1981 2146-CST
From: Mabry Tyson <ATP.Tyson at UTEXAS-20>
Subject: Timing msg on last msg from me
To: rpg at SU-AI
When I sent my last msg to you (a few minutes ago), I didn't realize that
I was getting messages then that you had sent some 7 hours earlier.
Our system was down so we were just getting the mail. This should explain
my comment about getting a msg from you while I was typing that one in.
-------
-------
∂06-Apr-81 1204 RPG
∂03-Apr-81 1531 ML
∂02-Apr-81 2346 KASHTAN at SRI-AI Re: franzlisp
Date: 2 Apr 1981 2348-PST
From: KASHTAN at SRI-AI
Subject: Re: franzlisp
To: ML at SU-AI
In-Reply-To: Your message of 2-Apr-81 2301-PST
1) Does franzlisp pose any restrictions of its own on the address space
available to a user?
Yes and no. Since franz lisp uses a segment based allocation
scheme and a bitmap for marking data structures during garbage
collection there are static arrays (for the bitmap and for
segment descriptors) that place an upper bound on the size
of the franz lisp address space. It is not a hard limit,
though. Re-compiling the interpreter with larger static
data structures will allow you to use a larger address space.
I think the default maximum is around 5 Mbytes. Where you
are going to really run into trouble is in the virtual address
space which Unix gives you. There was a design flaw in the
vax memory architecture (driven by the fact that VAXen had
to originally run with only 128Kb memory) which made the page
size very small (512 bytes). To get around the horrendous size
of page tables required for this DEC went to a 2 level paging
scheme and paged the user's page tables. Unfortunately, UNIX
does not page the user page tables. The difference here is
that while you would normally (if paging the page tables) only
require 4 bytes of resident physical memory for every 64Kb of
virtual memory -- on UNIX you require 516 bytes of resident
physical memory for every 64Kb of virtual memory. This adds
up very quickly. So you can pretty much rule out humungous
(eg 128Mbyte) address spaces on your VAX for the time being.
2) Does it run resonably fast (either under unis or unix), particularily
the compiled code?
If you are comparing compiled code to what you are used to in
MACLISP, no (particularly for heavy arithmetic computation).
We tried to use Franz Lisp for some Image Analysis stuff and
it just was too slow to be usable. There have been some
recent fixes to the compiler to improve performance in array
accessing and arithmetic computation but these have really
not been sufficient for our purposes. I think we are now
betting on NIL (which should port to Unix quite trivially).
3) How difficult is it to write a driver for a device hanging off the
unibus on a dr11-b(this is a dma device, we would be interfacing
a grinell) for the operating system?
Grinell's on dr-11b's are absolutely trivial. There are
probably 1/2 dozen Unix drivers (all working) available to
run your Grinnel through a dr-11b. Your best bet would be
Mike Accetta (accetta@cmua).
4) What are your general impressions of franzlisp as a workable system
on a vax?
If you are really interested in finding out about Franz Lisp
as a system building tool on the VAX, I would suggest talking
to Andy Witkin (witkin@sri-ai). He is the resident MACLISP
person (ex-MIT vision person) around here and has tried to
use Franz Lisp as a MACLISP substitute on the VAX.
Sorry to be presenting such a generally dim view of the world. The VAX is
just starting to mature as a research tool -- things are still kind of bare.
On the bright side, you will definitely want to be using Gosling's EMACS for
the VAX. A very winning editor!!
David
-------
∂14-Apr-81 2031 RPG
To: RPG at SU-AI, jonl at SU-AI
∂14-Apr-81 2022 HEDRICK at RUTGERS revised (final⊗?) version of report on Lisp conference
Date: 14 Apr 1981 1237-EST
From: HEDRICK at RUTGERS
Subject: revised (final⊗?) version of report on Lisp conference
To: eis at MIT-AI, geoff at SRI-KL, boyer at SRI-KL, engelmore at USC-ISI,
To: dreifus at WHARTON-10
Redistributed-To: Bboard at SRI-CSL, bboard at SCORE, bboard at SAIL
Redistributed-By: GEOFF at SRI-CSL
Redistributed-Date: 14 Apr 1981
I have received a number of comments on my earlier report. Here is a
revision that incorporates most of them. It is still quite informal
in tone, and should probably not be circulated outside the ARPAnet
community.
---------------------------------------------------------------------
This is a slightly revised report on the Lisp conference at SRI. It
has been modified to reflect some of the comment of people who read
the first draft. The conference was called by ARPA to discuss the future
of Lisp in the AI community, as well as the proposal for ARPA to buy
Dolphin computers for use within this community. It lasted from 8:30 am
to about 10pm on 8 April.
One of the major concerns that motivated the meeting was a feeling that
there are suddenly many projects to reimplement Lisp, and that we may
end up with many half-baked, incompatible implementations. There had
been some hope for getting some coherence among them. As far as I can
see, these fears are somewhat justified, and little was accomplished
towards creating coherence. There were in fact 13 Lisp implementation
projects listed. (Some of these have been finished, however, so that
number is a bit too big.) Fortunately, none of them are creating new
languages. Rather they are reimplementations of existing dialects for
new hardware. Thus there is somewhat less chaos than the number 13
would imply. Here they are. All results are publically available
unless stated otherwise.
Interlisp:
SRI portable Interlisp [SRI]. not yet funded. projected to take 18
months once it is funded. They are thinking of the VAX, F-5, or
any 32-bit machine that they can get funding for.
Interlisp-D [Xerox]. For Dophin, a Lisp machine with bit-mapped
display. Finished.
Interlisp-Jericho [BBN]. For BBN's Jericho, a high-performance
personal computer. in progress, projected to be ready May,
1982. I believe results will be proprietary.
VAX Interlisp [USC-ISI]. They hope to have the "virtual machine"
(i.e. the lowest level of the interpreter) running by June, but
it will be up to a year before the whole environment is working.
This is the most critical of all the projects as far as most
users are concerned.
MACLisp:
Lisp machine [MIT]. A version of Lisp extended to make heavy use of
bit-mapped display, and having a number of new language
features. Finished some time ago, but development continues.
Results are proprietary, with MIT licensing two commerical
companies to distribute them.
NIL [MIT]. Intended to have everything that the Lisp machine has
that will be useful on a conventional machine. Also
high-performance compiler. Will have something by end of the
summer, but development will be ongoing. Mainly intended for
VAX, but probably will be done for extended-addressing 20.
S1-NIL. NIL for the S1. This is a multi-CPU supermachine sponsored
by the military (Navy?). Projected to be ready in about 2.5
years.
Spice Lisp [CMU]. Dialect of MACLisp for personal computers. Will
use microcode assist. First implementation will be on VAX and
extended addressing DEC-20 by simulating the proposed microcode.
It is unclear whether the VAX and DEC-20 versions will be usable
Lisps or not. Officially, they are intended mainly for debugging
until the personal machine hardware is available. However they
obviously have hopes that these will be usable in their own
right. [see below for comments on this] Projected to be ready in
early 1982.
Franz Lisp [Berkley]. MACLisp dialect for VAX. finished. Many
people seem to be unenthusiastic about this, but it seems to be
a solid implementation. Maybe a trifle slower than it might be
and somehow not as "sexy" as a typical MIT product.
Other dialects:
Standard Lisp (Utah) - This is really a research project in
portability. They are trying to write as much of Lisp as
possible in Lisp. The compiler has extensions to allow it to be
used for system programming. Currently a very small part is
still written in assembly language. They should have an
implementation for extended-address DEC-20 within 6 months.
Elisp (Rutgers) - This is a recoding of R/UCI Lisp for extended
addressing DEC-20. This should be finished by the end of the
summer.
MDL [MIT] - This is not really a Lisp dialect. It is intended as a
successor to Lisp. It has more data types and has been
generally cleaned up. they are working on a portable
implementation. There has been a DEC-20 implementation for
years. They now have an implementation that makes some use of
extended addressing. when the portable implementation is
finished, it will be used to bring up a fully extended version
for the DEC-20. This is projected to be in 6 months.
Of all these, the project that generated the most interest was clearly
the VAX Interlisp. Many people are committed to both the VAX and
Interlisp, and are in bad shape until this happens.
Now some comments as to why there are 13 projects. I will not comment
much on the "other dialects". MDL is its own thing, and a portable
implementation for it makes perfect sense. Similarly, Utah's research
is a very interesting project. In my opinion it is a more promising
approach than those being used by the Interlisp or MACLisp people, and
these folks would have been well advised to be cooperating more closely
with Utah than they are. Our project is strictly a short-term fix to a
critical problem, and requires minimal effort. That is its only
possible justification. In the long run we will probably want to choose
a dialect that is going to be available on personal machines.
Now for the Interlisp and MACLisp projects. They are all attempts to
implement existing languages for new hardware. In the case of MACLisp
they also are trying to clean up and develop the language further.
The Interlisp projects are coordinated with each other, at least in the
sense that they are all implementing the same language. Also, much of
the Lisp code is shared. However apparently the Interlisp "virtual
machine" (i.e. the part done in assembly language) is relatively large,
and the user interface (e.g. debugger) depends upon details of the stack
that are different for different machines. Thus transporting Interlisp
is a fairly major project. As far as I can see, the projects other than
SRI's were reimplementations of the virtual machine for particular
hardware, with no particular thought given to portability. I think SRI
hopes to improve this. The usefulness of this project will be affected
by who sponsors them, since certain funding arrangements could result in
a proprietary product. There is a single manual that applies to all
Interlisp versions. [This is more important than it sounds.]
The MACLisp projects are not particularly coordinated. Each of them is
implementing different dialects, with separate (or non-existent)
manuals. In general the Lisp Machine seems to have the most features,
and the other dialects are probably more or less subsets of it. Of the
current projects, there are considerable differences in style:
Franz Lisp is the most conservative. They wanted something up
quickly, using existing technology. It was done in C, which
should help its transportability.
Lisp Machine is the most radical. First, it is standalone, with
microcode support. Second, it has every language feature one
can imagine except for spaghetti stacks. Finally, it supports
the bit-mapped display. They believe that many of its features
could only be done on special-purpose hardware. This might
possibly be transportable to another microcodable machine with
similar capabilities, though no particular thought was given to
portability.
Spice Lisp and NIL are in some sense compromises. They are attempts
at cleaning up the old language design, and taking many of the
good ideas of Lisp Machine Lisp, but for somewhat more
conventional machines. At the moment these projects talk to
each other, but are planning to implement somewhat different
dialects. They were strongly encouraged to talk to each other.
They are both giving thought to portability, though SPICE is
only intended to be portable among personal machines with
certain capabilities.
The big question is, why so many projects? As far as I can see,
here are the justifications:
MDL - this is a new language design, with generally good ideas. It has
been very influential on newer developments in Lisp.
Utah - this is a research project in portability, and seems to be
doing very good work. In retrospect, the AI community would be
much better off if Utah had decided to do their research using
either Interlisp or MACLisp. As it is, they have attempted to
create a new dialect, and no one is interested. Probably their
work will be ignored, much to everyone's hurt, unless they
decide to change to another dialect, which I do not expect.
Franz Lisp and Elisp - these are projects to transport existing
dialects to machines with lots of users that desperately needed
the results. Elisp should die away eventually if other projects
succeed. Franz Lisp may well survive.
Interlisp - these projects are simply transporting Interlisp to other
machines, which is always reasonable. The only real criticism
here would be that it is a shame that they can't develop
technology to produce a new implementation more quickly. But
this is what SRI proposes to do. In my opinion it is critical
for that project to be done in such a way that the results are
public.
MACLisp - it is unfortunate that so much work is being done on MACLisp
in an uncoordinated way. There is some evidence that each
project is made up of "true believers" who believe that there is
little merit to the others. We heard a somewhat amusing comment
by one. He said it wasn't true that there was chaos among the
MACLisp people. It was just that there were 4 different
projects going in 4 different directions....
Everyone seems to believe that it is a good idea for there to be ongoing
work on both Interlisp and MACLisp. Interlisp tends to be more
conservative in its development. It has good user facilities and
well-coordinated support. But there was a surprising concensus (that
included most of the Interlisp users) that
- Interlisp is quite expensive compared to MACLisp
- Interlisp as a dialect lacked a number of important features
compared to MACLisp, and had no important features missing in
MACLisp. Note that this comment refers only to facilities
commonly used in programs, not to the user support environment.
Many people believe that in user support Interlisp is better
than MACLisp (except on the Lisp Machine, where MACLisp really
shines)
Thus what was keeping people with Interlisp is
- good user facilities
- the fact that all implementations are compatible
- good, complete documentation
- good support
To the outside observer it appeared that in the long run MACLisp might
in fact take over if it could do the following:
- supply the user facilities of the same power as Interlisp's, or
document the fact that it already has them (if it does - I take
no position on this question)
- agree on a common language definition, with extensions for the Lisp
Machine and others who need it
- produce a complete manual, showing all the user facilities and being
common among implementations. A good form for this might be a
loose-leaf binder, so that they could provide additional pages
and chapters for the Lisp machine, and let you select which
debugger and editor you wanted.
- somehow assure users outside MIT that there was a central support
organization that would respond to their concerns. (This seems
to be true, but there may be a PR problem.)
- possibly do something to isolate non-MIT users from the hack-of-the
week club, while preserving the fact that Maclisp will continue
to develop more aggressively than Interlisp. It is unclear
whether there is a real problem here or a PR problem.
I am not convinced that the MACLisp folks can do this if left to
themselves. There was a proposal that ARPA might somehow be able to
cause it to happen.
Finally there is the question of what will happen next as far as
hardware acquisition. We polled representatives of various user groups.
Most of them have DEC-10's and -20's. They all say the PDP-10 is dead,
but are still doing most of their work on it. However there are also a
significant number of people who use VAX as their primary system. Some
of these are using Franz Lisp. It seems fine. But many are desperate
for VAX Interlisp. Few people are currently using personal computers
for much, or even have definite plans to use them. The main places that
are highly committed are
MIT, where most Lisp work is using Lisp Machines
BBN, which is committed to Jericho
CMU, which is committed to Spice (in a somewhat indefinite future),
PARC, where most Lisp work is done with Dolphins and Dorados
HPP(Sumex), which is committed to Dolphins
Others are hedging their bets with one or two experimental machines, or
are just plain waiting.
On the other hand, there are a number of complaints of a serious
shortage of cycles. The most vocal is HPP/Sumex. Thus there is some
pressure on ARPA to do something immediately. HPP is pressuring them to
buy a large group of Dolphins. There may also be pressure from
elsewhere, but it was not clear in this meeting. A number of other
people have said that if ARPA does go this way, they will follow. But
few people other than HPP feel strongly enough to commit to Dolphins
with their own money, unless ARPA does. If ARPA does, then it will
become a de facto standard and no one wants to be left out. People are
concerned that the Dophin is a bit too slow (apparently about 1/2 the
power of a Lisp Machine). The feeling is that a year ago it would have
been a great idea, but its time may have passed. The problem is that
there is no obvious other candidate. People advised ARPA to look around
carefully to see if there wasn't something better. One problem is that
whatever it is must support Interlisp. Thus the Lisp machine will only
work if they will put Interlisp-D on it. This might be technically
feasible, but the Lisp Machine people aren't interested in doing it.
(Whether the smell of that much money will arouse their appetite remains
to be seen.) The Jericho isn't quite ready, nor are any other personal
computers, though many are on the horizon. The only other thing that
could be done quickly would be a single user VAX, which DEC might be
able to build if they would, or a small Foonly (a PDP-10 equivalent).
DEC had a single user PDP-10, which would be an ideal solution, but
decided not to build it. The guess is that even ARPA isn't a large
enough customer to cause DEC to do something it otherwise wouldn't do.
If there is nothing better than the Dolphin, I don't have much of a
guess whether ARPA will get it or not. I think they may flip a coin.
The problem is that the proposed buy of Dolphins would be a large
commitment, and might make it hard for ARPA to take advantage of a
better system that may show up in a year. It is not just that the
hardware will be expensive. It is that by the time you add in the
software and hardware support, the total is 3 times the actual hardware
purchase price.
At that point the meeting ended, with no conclusion.
-------
∂22-Apr-81 1801 Bernard S. Greenberg <Greenberg at MIT-Multics> Multics Timing results vindicated
Date: 22 April 1981 2057-est
From: Bernard S. Greenberg <Greenberg at MIT-Multics>
Subject: Multics Timing results vindicated
To: RPG at SU-AI
Cc: CHoffman.mal at MIT-Multics, HIC at MIT-MC,
lisptranslators at SU-AI
Laugh not at Multics nor Multics Maclisp, but at a pretty
cruddy open-code implementation of MAPCAN. Due to footwork
by Carl Hoffman and myself, we found our compiler generating
calls to NCONC in the code for mapcan! Needless to say,t his
caused quadratic time expansion in list-searching!
This was the cause of the 86-second run. Recoding
mapcan as a macro keeping track of the end of the list cleverly,
I produced the following results of which I am no longer ashamed:
lisp
*
(setq base 10.)
10.
(load 'gabx)
t
(test)
2592.
(runtime 3.690232)
(gctime 2.478373)
t
(test)
2592.
(runtime 3.679003)
(gctime 3.930743)
t
(test)
2592.
(runtime 3.693353)
(gctime 2.650682)
t
(quit)
∂23-Apr-81 1232 RPG FRANZ Benchmark (FRPOLY)
To: lisptranslators at SU-AI
Here, below, is the benchmark from Berkeley. It is in roughly
MacLisp syntax, but let me point out a few things about it.
First, DEFMACRO and the ` (backquote) syntax. DEFMACRO is
a mechanism for defining macros in MacLisp in which the form
is broken into named arguments, unlike standard MacLisp macros
with have exactly 1 argument which is the macro form itself (EQly
that form). The backquote syntax takes a form and produces code
to generate that form. A example helpe here:
`(atom ,e) turns into (list 'atom e)
`(signp e ,x) is (list 'signp 'e x)
Thus, , (comma) is the unquoting character.
For example, then, occurrences of (pcoefp x) in the code
below turn into (atom x) by the action of the macro
pcoefp. DEFMACRO provides a form which is substituted for
the calling form with arguments bound in the obvious manner.
Here is the equivalent standard MacLisp macro definition of
pcoefp:
(defun pcoefp macro (x)
(list 'atom (cadr x)))
To run this benchmark interpretively, I suggest expanding the
macros once, either at read time or at first runtime. For those
who need it I can provide this file with macros expanded.
Another hack for defining these macros so that they are expanded
once only is:
(defun pcoefp macro (x)
((lambda (form)
(rplaca x (car form))
(rplacd x (cdr form))
form) ;value of RPLACD assumed to be undefined
(list 'atom (cadr x))))
LOCALF seems to be a declaration of LOCAL function names. For MacLisp
I've commented this out. SPECIAL means that there is a global
value cell and that binding is dynamic on that cell.
Here is what SIGNP does:
2) SIGNP IS NOW A FSUBR. THE FIRST ITEM IN THE ARGLIST IS AN
INDICATOR FOR COMPARISON TO ZERO, E.G., (SIGNP LE N) IS NON-NIL
IF AND ONLY IF THE VALUE OF N IS A NUMBER LESS THAN OR EQUAL TO
ZERO [SIGNP DOES NOT REQUIRE N TO BE OF NUMBER TYPE]. THE
INDICATORS FOLLOW THE PDP-10 ARITHMETIC COMPARISON INSTRUCTIONS, AND
SHOULD BE SELF EXPLANATORY: L E LE GE N G
[E means zerop, N means not zerop.]
(RUNTIM) and (STATUS GCTIME) return the number of microseconds of
total runtime and gctime. Note that gctime is included in
runtime in MacLisp.
There is a difference between `+' and `PLUS' in Franz, which is
that + takes 2 arguments, both fixnums (machine integers) and returns
a fixnum as its result. PLUS takes any number of any type of number and
returns the most appropriate type number. In the tests below, one of them
is designed to overflow the VAX machine integer range and drift into
BIGNUMs, which are any integer larger than the architecture supports. In MacLisp
and FRANZ there is a BIGNUM packake that allows one to have contiguous
words of memory represent one number. So, beware of where there are +'s and
PLUS's. The same is true for - and DIFFERENCE, * and TIMES, / and QUOTIENT,
> and GREATERP, < and LESSP, etc. Generic arithmetic is closed compiled
while specific type is open coded.
(ODPP x) tests if X is odd.
= is numeric EQUAL.
PDIFFER1 is mentioned but not defined; is not called for these tests, however.
Here's my transcript of SAIL MacLisp:
(setup)
(Z 1 1.0 0 (Y 1 1.0 0 (X 1 1.0 0 1.0)))
(bench 2)
(POWER= 2 (0.017 0.0) (0.017 0.0) (0.016 0.0))
(bench 5)
(POWER= 5 (0.116 0.0) (1.334 1.084) (0.15 0.0))
(bench 10)
(POWER= 10 (2.534 1.8) (19.733 17.151) (8.983 7.901))
(bench 15)
(POWER= 15 (16.65 8.832) (112.516 89.298) (63.9 56.749))
Which I ran compiled. Times are in seconds.
The following is the benchmark.
-rpg-
;;;; Benchmark Commences:
;;; Franz Lisp benchmark from Fateman
;; test from Berkeley based on polynomial arithmetic.
(declare (special ans coef f inc i k qq ss v *x*
*alpha *a* *b* *chk *l *p q* u* *var *y*
r r2 r3 start res1 res2 res3))
(declare (localf pcoefadd pcplus pcplus1 pplus ptimes ptimes1
ptimes2 ptimes3 psimp pctimes pctimes1
pplus1))
;; Franz uses maclisp hackery here; you can rewrite lots of ways.
(defmacro pointergp (x y) `(> (get ,x 'order)(get ,y 'order)))
(defmacro pcoefp (e) `(atom ,e))
(defmacro pzerop (x) `(signp e ,x)) ;true for 0 or 0.0
(defmacro pzero () 0)
(defmacro cplus (x y) `(plus ,x ,y))
(defmacro ctimes (x y) `(times ,x ,y))
(defun pcoefadd (e c x) (cond ((pzerop c) x)
(t (cons e (cons c x)))))
(defun pcplus (c p) (cond ((pcoefp p) (cplus p c))
(t (psimp (car p) (pcplus1 c (cdr p))))))
(defun pcplus1 (c x)
(cond ((null x)
(cond ((pzerop c) nil) (t (cons 0 (cons c nil)))))
((pzerop (car x)) (pcoefadd 0 (pplus c (cadr x)) nil))
(t (cons (car x) (cons (cadr x) (pcplus1 c (cddr x)))))))
(defun pctimes (c p) (cond ((pcoefp p) (ctimes c p))
(t (psimp (car p) (pctimes1 c (cdr p))))))
(defun pctimes1 (c x)
(cond ((null x) nil)
(t (pcoefadd (car x)
(ptimes c (cadr x))
(pctimes1 c (cddr x))))))
(defun pplus (x y) (cond ((pcoefp x) (pcplus x y))
((pcoefp y) (pcplus y x))
((eq (car x) (car y))
(psimp (car x) (pplus1 (cdr y) (cdr x))))
((pointergp (car x) (car y))
(psimp (car x) (pcplus1 y (cdr x))))
(t (psimp (car y) (pcplus1 x (cdr y))))))
(defun pplus1 (x y)
(cond ((null x) y)
((null y) x)
((= (car x) (car y))
(pcoefadd (car x)
(pplus (cadr x) (cadr y))
(pplus1 (cddr x) (cddr y))))
((> (car x) (car y))
(cons (car x) (cons (cadr x) (pplus1 (cddr x) y))))
(t (cons (car y) (cons (cadr y) (pplus1 x (cddr y)))))))
(defun psimp (var x)
(cond ((null x) 0)
((atom x) x)
((zerop (car x)) (cadr x))
(t (cons var x))))
(defun ptimes (x y) (cond ((or (pzerop x) (pzerop y)) (pzero))
((pcoefp x) (pctimes x y))
((pcoefp y) (pctimes y x))
((eq (car x) (car y))
(psimp (car x) (ptimes1 (cdr x) (cdr y))))
((pointergp (car x) (car y))
(psimp (car x) (pctimes1 y (cdr x))))
(t (psimp (car y) (pctimes1 x (cdr y))))))
(defun ptimes1 (*x* y) (prog (u* v)
(setq v (setq u* (ptimes2 y)))
a (setq *x* (cddr *x*))
(cond ((null *x*) (return u*)))
(ptimes3 y)
(go a)))
(defun ptimes2 (y) (cond ((null y) nil)
(t (pcoefadd (plus (car *x*) (car y))
(ptimes (cadr *x*) (cadr y))
(ptimes2 (cddr y))))))
(defun ptimes3 (y)
(prog (e u c)
a1 (cond ((null y) (return nil)))
(setq e (+ (car *x*) (car y)))
(setq c (ptimes (cadr y) (cadr *x*) ))
(cond ((pzerop c) (setq y (cddr y)) (go a1))
((or (null v) (> e (car v)))
(setq u* (setq v (pplus1 u* (list e c))))
(setq y (cddr y)) (go a1))
((= e (car v))
(setq c (pplus c (cadr v)))
(cond ((pzerop c) (setq u* (setq v (pdiffer1 u* (list (car v) (cadr v))))))
(t (rplaca (cdr v) c)))
(setq y (cddr y))
(go a1)))
a (cond ((and (cddr v) (> (caddr v) e)) (setq v (cddr v)) (go a)))
(setq u (cdr v))
b (cond ((or (null (cdr u)) (< (cadr u) e))
(rplacd u (cons e (cons c (cdr u)))) (go e)))
(cond ((pzerop (setq c (pplus (caddr u) c))) (rplacd u (cdddr u)) (go d))
(t (rplaca (cddr u) c)))
e (setq u (cddr u))
d (setq y (cddr y))
(cond ((null y) (return nil)))
(setq e (+ (car *x*) (car y)))
(setq c (ptimes (cadr y) (cadr *x*)))
c (cond ((and (cdr u) (> (cadr u) e)) (setq u (cddr u)) (go c)))
(go b)))
(defun pexptsq (p n)
(do ((n (quotient n 2) (quotient n 2))
(s (cond ((oddp n) p) (t 1))))
((zerop n) s)
(setq p (ptimes p p))
(and (oddp n) (setq s (ptimes s p))) ))
(defun setup nil
(putprop 'x 1 'order)
(putprop 'y 2 'order)
(putprop 'z 3 'order)
(setq r (pplus '(x 1 1 0 1) (pplus '(y 1 1) '(z 1 1)))) ; r= x+y+z+1
(setq r2 (ptimes r 100000)) ;r2 = 100000*r
(setq r3 (ptimes r 1.0)); r3 = r with floating point coefficients
)
; time various computations of powers of polynomials, not counting
;printing but including gc time ; provide account of g.c. time.
; The following function uses (ptime) for process-time and is thus
; Franz-specific.
(defmacro ptime () '`(,(runtime) ,(status gctime)))
(defun bench (n)
(setq start (ptime)) ; Franz ticks, 60 per sec, 2nd number is GC
(pexptsq r n)
(setq res1 (ptime))
(pexptsq r2 n)
(setq res2 (ptime))
; this one requires bignums.
(pexptsq r3 n)
(setq res3 (ptime))
(list 'power= n (b1 start res1)(b1 res1 res2)(b1 res2 res3)))
(defun b1(x y)(mapcar '(lambda(r s)(quotient (float (- s r)) 1000000.0)) x y))
;instructions:
; after loading, type (setup)
; then (bench 2) ; this should be pretty fast.
; then (bench 5)
; then (bench 10)
; then (bench 15)
;...
∂23-Apr-81 1245 RPG Franz benchmark
To: lisptranslators at SU-AI
The FRANZ benchmark is to referred to as: FRPOLY.
-rpg-
∂24-Apr-81 1324 Bernard S. Greenberg <Greenberg at MIT-Multics> Re: FRANZ Benchmark, Multics Numbers
Redistributed-Date: 24 April 1981 16:24 est
Redistributed-By: Greenberg.Symbolics at MIT-Multics
Redistributed-To: lisptranslators at SU-AI, rpg at SU-AI
Date: 23 April 1981 2059-est
From: Bernard S. Greenberg <Greenberg at MIT-Multics>
Subject: Re: FRANZ Benchmark, Multics Numbers
To: RPG at SU-AI
Cc: lisptranslators at SU-AI
Here they are, and not bad at all. Bear in mind that Multics Lisp
represents all fixna and flona as immediate, thus has no PDL
numbers, pdlnmks, number consing, etc. Bigna are allocated
contiguously.... Code was compiled, using installed system
backquote and an adhoc defmacro definition. Wasn't clear if
RPG's input numbers were decimal or octal, so I did it both ways:
lisp
*
(load 'gab2)
t
(setup)
(z 1 1.0 0 (y 1 1.0 0 (x 1 1.0 0 1.0)))
(bench 2)
(power= 2 (0.016692 0.0) (0.015114 0.0) (0.015725 0.0))
(bench 5)
(power= 5 (0.150491 0.0) (0.212428 0.0) (0.154568 0.0))
(bench 10) ;=8
(power= 10 (0.968238 0.184816) (1.71576 0.389726) (0.99761099 0.187837))
(bench 10.) ;decimal
(power= 12 (2.000796 0.405341) (3.569996 0.880229) (1.883108 0.231459))
(bench 15) ;octal = 13.
(power= 15 (6.563067 1.148998) (13.168704 2.515469) (6.694873 1.155386))
(bench 15.) ;decimal
(power= 17 (12.532608 1.85896) (27.568518 5.391129) (12.636826 1.860995))
(quit)
hmu
Multics 35.0a, load 42.0/120.0; 42 users, 27 interactive, 12 daemons.
Absentee users 1/3 (+2 FG)
∂24-Apr-81 1414 RPG Errata
To: lisptranslators at SU-AI
In the FRPOLY benchmarks, the calls should be:
(SETUP)
(BENCH 2.)
(BENCH 5.)
(BENCH 10.)
(BENCH 15.)
-rpg-
∂24-Apr-81 1608 CSVAX.jkf at Berkeley octal vrs decimal
Date: 24 Apr 1981 15:52:49-PST
From: CSVAX.jkf at Berkeley
To: lisptranslators@su-ai
Subject: octal vrs decimal
I can't see any reason for using octal for input or output in any benchmark.
Why don't we just make it a rule that all numbers are decimal to reduce
confusion in the future.
∂25-Apr-81 1242 Greenberg.Symbolics at MIT-Multics Re: octal vrs decimal
Date: 25 April 1981 15:39 est
From: Greenberg.Symbolics at MIT-Multics
Subject: Re: octal vrs decimal
To: CSVAX.jkf at BERKELEY
cc: lisptranslators at SU-AI
In-Reply-To: Message of 24 April 1981 18:52 est from CSVAX.jkf
Why dont we put trailing dots on numbers so no-one has a chance to blow it?
∂25-Apr-81 1320 Vanmelle at SUMEX-AIM Re: Re: octal vrs decimal
Date: 25 Apr 1981 1315-PST
From: Vanmelle at SUMEX-AIM
Subject: Re: Re: octal vrs decimal
To: Greenberg.Symbolics at MIT-MULTICS, CSVAX.jkf at BERKELEY
cc: lisptranslators at SU-AI
In response to the message sent 25 Apr 1981 1243-PST by
I'm with jkf. Lisp is not assembly language; why should anyone have
to qualify decimal integers? Adding decimal points could lead to
additional confusion--in at least one dialect (Interlisp), decimal
points imply floating-point.
-------
∂25-Apr-81 1727 Greenberg.Symbolics at MIT-Multics Re: Re: octal vrs decimal
Date: 25 April 1981 20:25 est
From: Greenberg.Symbolics at MIT-Multics
Subject: Re: Re: octal vrs decimal
To: Vanmelle at SUMEX-AIM
cc: CSVAX.jkf at BERKELEY, lisptranslators at SU-AI
In-Reply-To: Message of 25 April 1981 16:15 est from Vanmelle
The issue here is not language design or what
Lisp oughtta be; the issue is minimizing confusion in
translation between dialects and making the rules clear.
∂25-Apr-81 2210 CSVAX.jkf at Berkeley Re: Re: octal vrs decimal
Date: 25 Apr 1981 21:34:31-PST
From: CSVAX.jkf at Berkeley
To: Greenberg.Symbolics@MIT-Multics
cc: lisptranslators at SU-AI, Vanmelle at SUMEX-AIM
Subject: Re: Re: octal vrs decimal
In-reply-to: Your message of 25 Apr 1981 1725-PST (Saturday).
Date: 25 Apr 1981 1725-PST (Saturday)
From: Greenberg.Symbolics@MIT-Multics
Subject: Re: Re: octal vrs decimal
To: Vanmelle at SUMEX-AIM
cc: CSVAX.jkf at BERKELEY, lisptranslators at SU-AI
In-Reply-To: Message of 25 April 1981 16:15 est from Vanmelle
The issue here is not language design or what
Lisp oughtta be; the issue is minimizing confusion in
translation between dialects and making the rules clear.
Right, we should make the conversion between dialects as easy as possible,
and that is why I suggest that we make decimal the default. I don't know
of any dialect which can't understand decimal. Our lisp system (Franz)
at least only handles octal on input not on output (since we've never found
any need for it).
∂24-Apr-81 1411 CSVAX.jkf at Berkeley franz timing results
Date: 24 Apr 1981 13:22:17-PST
From: CSVAX.jkf at Berkeley
To: rpg@su-ai
Subject: franz timing results
Cc: CSVAX.fateman@Berkeley, CSVAX.jkf@Berkeley
frpoly benchmark
submitted by j foderaro
(csvax.jkf@berkeley)
24 april 81
Here are the results or running the pairs benchmark on Franz Lisp on
a VAX 11/780 runing Berkeley 4BSD Unix. The load average was less
than one when the timing was done. These results supersede the timings
you have which were made by us in March.
Script started on Fri Apr 24 06:04:12 1981
Reval: lisp
Franz Lisp, Opus 34
-> (load 'frpoly)
[fasl frpoly.o]
t
-> (setup)
(z 1 1.0 0 (y 1 1.0 0 (x 1 1.0 0 1.0)))
-> (bench 2)
(power= 2 (0.0167 0.0) (0.0333 0.0) (0.0 0.0))
-> (bench 5)
(power= 5 (0.15 0.0) (0.75 0.4333) (0.3833 0.2166))
-> (bench 10)
(power= 10 (2.8167 1.05) (8.2333 3.3) (3.2 1.2333))
-> (bench 15)
(power= 15 (18.2333 5.35) (92.0333 41.6333) (18.8 5.1333))
->
script done on Fri Apr 24 06:07:48 1981
∂28-Apr-81 1122 Vanmelle at SUMEX-AIM Re: Benchmarks
Date: 28 Apr 1981 1118-PDT
From: Vanmelle at SUMEX-AIM
Subject: Re: Benchmarks
To: RPG at SU-AI
In response to your message sent 28 Apr 1981 0625-PDT
Sure. I can run them both on a 2020 (Sumex2020) and a 2060 (Score).
Has someone already done th e translation?
Bill
-------
I don't think so. The only tricky parts are the more-than-5-args problem
and catch/throw. I've faked catch and throw in InterLisp with the spaghetti
stuff. Let me try to locate what I did and show you. You may luck out because
at one point I had a MacLisp=>InterLisp translator that I used. I'll also
try to dig that one up and see what it does to the benchmark.
-rpg-
∂28-Apr-81 2115 Mabry Tyson <ATP.Tyson at UTEXAS-20> Re: FRANZ Benchmark
Date: 28 Apr 1981 2310-CDT
From: Mabry Tyson <ATP.Tyson at UTEXAS-20>
Subject: Re: FRANZ Benchmark
To: RPG at SU-AI
In-Reply-To: Your message of 23-Apr-81 1432-CST
Mail from SU-AI rcvd at 24-Apr-81 0002-CST
Date: 23 Apr 1981 1232-PST
From: Dick Gabriel <RPG at SU-AI>
Subject: FRANZ Benchmark
To: lisptranslators at SU-AI
.......
Here's my transcript of SAIL MacLisp:
(setup)
(Z 1 1.0 0 (Y 1 1.0 0 (X 1 1.0 0 1.0)))
(bench 2)
(POWER= 2 (0.017 0.0) (0.017 0.0) (0.016 0.0))
(bench 5)
(POWER= 5 (0.116 0.0) (1.334 1.084) (0.15 0.0))
(bench 10)
(POWER= 10 (2.534 1.8) (19.733 17.151) (8.983 7.901))
(bench 15)
(POWER= 15 (16.65 8.832) (112.516 89.298) (63.9 56.749))
Which I ran compiled. Times are in seconds.
.......
I have a question about the results you show. The problem I see is that
the difference between the first result of (BENCH 15) and the third
result of (BENCH 15). If I am not wrong, the runtimes after subtracting
out the (rather large) GC times is 7.818 vs 7.151. The difference in
the two examples is that the first one uses integer coefficients while the
other uses the real number version of the same integer. That indicates
to me that your machine does real-number multiplication faster than it
does integer multiplication??? Note that the results for the smaller
benchmarks give the expected result that the integer multiplication is
faster than real number multiplication.
I am curious about this. Are you sure of your results? Do you get the
same results if you increase your free space (or whatever) so that the
amount of GC decreases to something much less than 80% of your total
time. If the real number version continues to run faster, I would be
very interested in why it is faster.
-------
FRPOLY at SAIL
The transcript was made blindly to give some rough idea of the runtime.
I'll run the entire thing again today and send out the real results.
-rpg-
∂02-May-81 1245 Mabry Tyson <ATP.Tyson at UTEXAS-20> Re: FRANZ Benchmark
Date: 2 May 1981 1437-CDT
From: Mabry Tyson <ATP.Tyson at UTEXAS-20>
Subject: Re: FRANZ Benchmark
To: RPG at SU-AI
In-Reply-To: Your message of 23-Apr-81 1432-CST
Here is the results of the FRPOLY benchmark. I did notice that compilation
of this benchmark resulted in a more of a speedup that it did on the
SCCPP benchmark.
My comment in the notes at the end mentions that UCI-Lisp doesn't have a
BIGNUM package. I don't know that for sure. The assembly language source
has a number of hooks for a BIGNUM package but I don't know where that package
is.
Results of LISP timing tests for UCI-Lisp
(Times are in the form R+G where R is the runtime (not including GC time)
and G is the GC time. All times are in seconds. "Interp" means interpreted,
"Slow" means compiled but using UUO-links, "Fast" means compiled with the UUO
links replaced by direct jumps.)
Processor
Program KL-2060 KI-1060
Interp Slow Fast Interp Slow Fast
FRPOLY:
Free: 100000. 75000.
(bench 0.719+0 0.142+0 0.043+0 2.627+0 0.576+0 0.181+0
2) 0.677+0 0.142+0 0.047+0 2.619+0 0.545+0 0.168+0
First 0.677+0 0.141+0 0.042+0 2.698+0 0.580+0 0.166+0
result 0.687+0 0.140+0 0.043+0 0.612+0 0.155+0
----------------------------------------------------------------------
Third 0.706+0 0.162+0 0.063+0 2.585+0 0.630+0 0.256+0
result 0.830+0 0.164+0 0.063+0 2.798+0 0.610+0 0.227+0
0.702+0 0.162+0 0.062+0 2.733+0 0.695+0 0.252+0
0.700+0 0.162+0 0.065+0 0.593+0 0.215+0
======================================================================
(bench 5.88+0 1.166+0 0.343+0 22.25+0 4.384+0 1.451+0
5) 5.696+0 1.142+0 0.355+0 21.87+0 4.462+0 1.297+0
First 5.706 1.146+0 0.338+0 4.719+0 1.500+0
result 1.18+0 0.351+0
----------------------------------------------------------------------
Third 5.891+0 1.343+0 0.523+0 23.04+0 4.964+0 2.097+0
result 5.880+0 1.383+0 0.51+0 21.64+0 5.084+0 2.065+0
5.884+0 1.345+0 0.522+0 5.093+0 2.048+0
1.341+0 0.514+0
======================================================================
(bench 122.2+1.1 25.48+1.02 8.63+1.04 -- -- 31.91+2.12
10) 25.14+0.98 8.42+1.02
First 25.53+1.03 8.47+1.01
----------------------------------------------------------------------
Third 126.4+2.2 28.17+2.02 11.57+2.04 -- -- 39.07+6.07
result 28.26+2.03 11.54+2.04
28.18+2.04 11.28+1.98
======================================================================
(bench -- 39.22+2.16 12.59+2.00 -- -- --
15) 12.98+2.06
First
----------------------------------------------------------------------
Third -- 43.46+3.08 17.22+3.02 -- -- --
result 17.58+3.05
======================================================================
Note: The results referred to as the first result is the result obtained
as the first value returned by BENCH. This is the value computed using
integer coefficients. The result referred to as the third result is the
third value returned by BENCH (for real number coefficients). UCI Lisp
does not have the bignum package so it could not compute the second
result returned by the BENCH routine.
-------
∂04-May-81 1326 correira at UTEXAS-11 UTLISP benchmarks
Date: 4 May 1981 at 1516-CDT
From: correira at UTEXAS-11
Subject: UTLISP benchmarks
To: rpg at su-ai
cc: correira
Hi! I have been very busy of late so I was only able to get to the
benchmarks late last week. I have three files to send and I would
like to know whether I should send them directly to you or to
LISPTIMINGS:
1) an overview of UTLISP 5.1 and the OS I am running the benchmarks
under (UT-2D),
2) the timings for SCCPP,
3) the timings for FRPOLY.
Sorry it took so long to get around to it.
Sincerely,
Alfred Correira
-------
Normally they are sent to LISPTRANSLATORS, which has the effect
of goading other translators into doing their jobs!
-rpg-
∂05-May-81 0643 correira at UTEXAS-11 SCCPP Timings for UTLISP
Date: 5 May 1981 at 0835-CDT
From: correira at UTEXAS-11
Subject: SCCPP Timings for UTLISP
To: lisptranslators at su-ai
Following are the timings for SCCPP for UTLISP 5.1. Because of local
interactive field length (= core size) restrictions, all runs were
submitted as batch jobs. "runtime" does not include "gctime".
Interpreted:
run#: #1 #2 #3 #4 #5
runtime: 18.15 18.17 18.25 18.22 18.26
gctime: 1.34 1.37 1.34 1.35 1.34
Run at 200000 (octal) field length with: 45300. words of free space
3030. words of full space
There were three garbage collections for each run.
Compiled:
run#: #1 #2 #3 #4 #5
runtime: 3.95 4.09 4.06 4.10 4.03
gctime: .97 .82 .84 .82 .83
Run at 20000 (octal) field length with: 45524. words of free space
2957. words of full space
There were three garbage collections for each run.
-------
∂05-May-81 0643 correira at UTEXAS-11 FRPOLY Timings for UTLISP
Date: 5 May 1981 at 0836-CDT
From: correira at UTEXAS-11
Subject: FRPOLY Timings for UTLISP
To: lisptranslators at su-ai
Following are the results for FRPOLY under UTLISP 5.1. The runs at
75000 (octal) were run interactively; the remainder were submitted
as batch jobs. "runtime" does NOT include "gctime".
Interpreted:
bench 2: (runtime+gctime)
R: 1.168+0 1.168+0 1.149+0 1.147+0
R2: 1.181+0 1.162+0 1.171+0 1.174+0
R3: 1.175+0 1.170+0 1.171+0 1.179+0
bench 5: (runtime over gctime)
R: 9.910 9.917 9.868 9.904
.156 .145 .152 .148
R2: 5.237 5.261 5.245 5.237
.162 .156 .157 .156
R3: 9.930 9.899 9.960 9.927
.323 .315 .311 .300
bench 10:
R: 213.160
4.205
R2: 7.136
.168
R3: 213.650
3.994
bench 2 and bench 5 were run at a field length (= core size) of
75000 (octal) words with: free space of 7500. words
full space of 2583. words
bench 2 required no garbage collections; bench 3 required 4 garbage
collections for each run.
bench 10 was run at a field length of 200000 (octal) words with:
free space of 41706. words
full space of 6685. words
bench 10 required 38 garbage collections.
For obvious reasons, I did not run bench 15.
Compiled:
bench 2:
R: .173 .139 .153 .149
0. 0. .108 0.
R2: .165 .167 .156 .150
0. .115 0. 0.
R3: .155 .154 .165 .183
0. 0. 0. 0.
bench 5:
R: 1.406 1.361 1.353 1.327
.328 .356 .366 .385
R2: .897 .872 .857 .861
.159 .253 .257 .260
R3: 1.430 1.372 1.382 1.375
.325 .395 .396 .269
bench 10:
R: 30.043 30.009 30.016
3.989 3.866 4.010
R2: 1.219 1.172 1.218
.143 .179 .155
R3: 30.495 30.509 30.528
4.015 3.896 3.916
bench 15:
R: 46.046 46.030
7.346 7.330
R2: 2.120 2.122
.171 .174
R3: 46.945 46.736
7.077 7.264
bench 2 and bench 5 were run at a field length of 75000 (octal)
words with: free space of 14177. words
full space of 1554. words
bench 2 required 0 or 1 garbage collections per run; bench 5
required 7 to 8 garbage collections per run.
bench 10 and bench 15 were run at a field length of 200000 (octal)
words with: free space of 42913. words
full space of 6859. words
bench 10 required 37 garbage collections per run; bench 15 required
63 garbage collections.
As you can see from the R2 results, there are times when a 60 bit word
size can come in handy.
-------
∂05-May-81 0643 correira at UTEXAS-11 A thumbnail sketch of UTLISP
Date: 5 May 1981 at 0821-CDT
From: correira at UTEXAS-11
Subject: A thumbnail sketch of UTLISP
To: lisptranslators at su-ai
Below is a short description of UTLISP and the OS I am running the
benchmarks under, provided for those of you (which is probably just
about everybody) who either have never seen this LISP dialect or
whose only exposure has consisted of denigratory comments scribbled
on bathroom walls.
Alfred Correira
-------------------------------------------------------------------
UTLISP is a LISP dialect for Control Data Corportaion 6000, Cyber
70, and Cyber 170 class machines. It is currently running at over
50 sites at some level (from UTLISP3 to UTLISP5.1) and under
various operating systems (NOS, NOS/BE, KRONOS, SCOPE, and
several home-brews, including our local UT-2D). UTLISP is based
on Blue Book Lisp; the first crude implementation goes back to
1967 as a project sponsored by W. W. Bledsoe. Extensive revi-
sions were made in the late 60s and early 70s by Dr. E. M.
Greenawalt, and by Bob Amsler, Jonathan Slocum, and Mabry Tyson,
culminating in Version 4. Version 5 was the product of my ef-
forts in 1979-1980. The current system consists of the inter-
preter, a compiler, LAP, and runtime support utilities. Most of
UTLISP is written in COMPASS (the assembly language of the CDC
mainframes) although much of the runtime support stuff released
with Version 5 is coded in LISP. The compiler is an old, can-
tankerous, and obscure master's project from around 1971 that is
not frequently used - most people who use UTLISP depend on the
speed of the underlying hardware to make up for this. UTLISP is
not used much for system-building; Bledsoe's theorem prover was
about the last big project written in UTLISP that I know of, and
it was converted to UCILISP years ago due to the primitive nature
of UTLISP at that time and the memory constraints imposed by our
OS.
Atoms in UTLISP are 60 bit quantities, including 3-18 bit fields
(CAR, CDR, CSR) plus flag bits. The CAR usually points at the
atom itself or to previous values of the atom (i.e. values are
maintained as stacks on the atoms themselves rather than being
pushed onto the runtime stack). The CDR field usually points at
the current value of the atom, and the CSR field points at the
atom's property list. Thus UTLISP uses shallow binding for
storing/retrieving atom values. There are no bignums (although
these are not usually necessary anyway with a 60 bit word size)
or smallnum (inums, etc. - i.e. no encoding of numbers in
pointer fields). The garbage collection scheme is mark and sweep,
the mark phase is based on Algorithm E in Chapter 2 of Knuth.
UTLISP 5.1 has most of the traditional accoutrements (property
lists, arrays, funargs that work, macros, read/print macros,
etc.), plus a reader with flexible lexical classes, virtual
memory that allows automatic retrieval of code from disk for in-
terpreted functions, overlays, interrupts, etc. It also has the
essential runtime supports: editor, BREAK, a MAKEFILE package,
Help, dynamic memory support, etc. The editor, BREAK, and
MAKEFILE (DSKOUT) packages use the corresponding features in
UCILISP as models (in particular, the UTLISP editor is a slightly
scaled-down version of the UCILISP editor). UTLISP lacks: abort
error recovery, ASCII (except for the Help system), strings, ef-
ficient vectors, a binary loader for compiled code, LEXPRS, etc.
UTLISP does provide extensive error-checking for the arguments of
system functions, and random and binary I/O.
I will mention only the OS that I am running the benchmarks on -
UT-2D. UT-2D is a home-grown OS that runs on a Dual Cyber
170/750 system. Each Cyber has 256k of central memory and 20
peripheral processors. They communicate through 492k of
extended-core storage. There are 3 844-4 disk systems (957 mega-
characters each) and 2 885 disk systems (2768 megacharacters
each). Each CPU has a 400 nanosecond cycle time with a maximum
transfer rate of one word each 50 nanoseconds; memory is organ-
ized into eight independent banks. Some disk numbers: average
seek time of 30 msec. for the 844s and 25 msec. for the 885s,
transfer rate of 6.45 megabits/sec for the 844s and 9.58
megabits/sec. for the 885s. UT-2D itself is non-paged, non-
virtual anything. Programs are restricted to 128k batch and 32k
interactive presently although the interactive memory size is due
to increase to 128k this summer with the installation of some new
semiconductor memory replacing the current extended-core storage.
The system supports about 170 conversational users through MOD-
COMP III and Interdata 8/32 front-ends plus a full batch load.
One Cyber is usually dedicated to running batch jobs and the oth-
er runs conversational jobs.
As hardware for UTLISP goes, the Cyber 170/750 is not terribly
friendly. There is no hardware support for recursion or environ-
ment manipulation. There are no machine instructions for direct-
ly accessing the fields of a LISP atom. The CPU
pipeline/instruction stack is large and slow to clear during
jumps, which UTLISP does frequently and with mad abandon.
UTLISP is available to all who want it. The user community is
divided primarily into classroom use to teach LISP/AI concepts
and a fair number of sites wanting UTLISP in order to run the U
of Utah's REDUCE system.
-------
∂26-May-81 0916 George J. Carrette <GJC at MIT-MC> benchmark.
Date: 26 May 1981 12:16-EDT
From: George J. Carrette <GJC at MIT-MC>
Subject: benchmark.
To: RPG at MIT-MC
Files: "MC:LIBDOC;BENCH >"
"MC:SCHEME;SCAM >"
"MC:SCHEME;CHURCH >"
Test on MC is in "MC:SCHEME;SCAM KL10"
I'll have a LISPM and NIL test soon too.
∂09-Aug-81 1912 RPG via CMU-20C Vacation
To: lisptiming at SU-AI
In case some of you are wondering what is up with the Lisp timing
project, it is temporarily on vacation while I am at CMU working on S-1 Lisp.
In the fall, arpa is partially funding the effort and I will have a grad
student to translate many of the benchmarks for the various sites.
See you in the fall.
-rpg-